Renesas SuperHTM Family SH72543R User Manual page 26

Section 3 Connection Procedures
Removing the common user-system interface adaptor cable (cable unit).
When removing the common-user system interface adaptor cable (cable unit)
from a converter board or a adaptor board, keep the board in place, hold both
sides of the connector at the head of the cable, and apply vertical force to pull
the cable away. If the join is stiff so that the cable is dificult to remove, pull the
cable head up from the right or left side. Do not apply pressure in the direction
marked "X", since this will damage the connector.
Figure 3 Removing the Common User-System Interface Adaptor Cable (Cable Unit)
Rev. 1.00 Nov. 18, 2008 Page 8 of 18
REJ10J1937-0100