Converter board for connecting 160-core flexible board flx160 to 120-pin 0.4-mm-pitch lqfp (6 pages)
Summary of Contents for Renesas M3T-SSOP42B-450
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
(ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. • These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited to the customer's application;...
(1) For debugging Mount the socket directly to the foot pattern on the target board. On top if it, mount the M3T-SSOP42B-450 and socket frame in that order. Then connect the pod probe of the emulation pod, etc. to the connector provided at the top of the M3T-SSOP42B-450.
Page 5
6. External Dimensions of the M3T-SSOP42B-450 1 : Pin No. of the M3T-SSOP42B-450 1 : Pin No. of the upper connector Figure 3 External dimensions of the M3T-SSOP42B-450 7. Target Foot Pattern Foot pattern recommended by Matsushita Electric Works, Ltd.
8. Precautions Cautions to Be Taken for This Product: • Do not solder the M3T-SSOP42B-450 directly on the target. Use the included socket. • When attaching the M3T-SSOP42B-450, be sure to confirm the pin positions. • When soldering the socket's body and mounting the M3T-SSOP42B-450, refer to the supplemen- tary document "Mounting the Socket Included with the M3T-SSOP42B-450"...