Converter board for connecting flx100 to 100-pin 0.5-mm-pitch lqfp (6 pages)
Summary of Contents for Renesas Direct Dummy IC M3T-DIRECT80S
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
CAUTION Renesas Tools Homepage http://www.renesas.com/tools Rev.2.00 Aug. 01, 2007 REJ10J0335-0200 M3T-DIRECT80S Direct Dummy IC for 80-pin 0.65mm pitch QFP If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.
1. Description This accessory tool connects an emulation pod and the target. It can be mounted on the same foot pattern as the MCU housed in the 80-pin 0.65mm pitch QFP. It is applicable to the M16C and 740 Family, etc. 2.
Page 5
Notes for This Product: • We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 7. External Dimensions of M3T-DIRECT80S : Pin No. of M3T-DIRECT80S : Pin No.
Page 6
8. Correspondence of Connectors J1 and J2 Table 2 lists the correspondence of M3T-DIRECT80S and connectors J1, J2. Table 2 Correspondence of M3T-DIRECT80S and connectors J1, J2 Connector DIRECT80S Connector pin No. pin No. pin No. J1-1 J1-26 J1-27 J1-2 J1-28 J1-3 J1-29...