Jumper Switch Setting When Using Development Tool - Renesas M3A-HS37 User Manual

3

3.2.5 Jumper Switch Setting when Using Development Tool

The SH7137 emulator-related signals (FWE/ASEBRKAK
pin. When using the development tools such as E10A-USB emulator and Flash Development Toolkit (FDT), set the jumper
switches as shown in Table 3.2.8.
Tool
E10A-USB emulator
FDT
Rev.1.00 Oct 09, 2008
REJ11J0021-0100
_____________________ ________________
/ASEBRK
Table 3.2.8 Jumper Setting for Each Connector
Connector
H-UDI connector (J2)
Serial port connector (J3)
Operational Specifications
3.2.5 Jumper Switch Setting when Using Development Tool
, TDI, TDO) are multiplexed with o flash writing control
Setting
JP7 to JP10
Don't care Connect "2-3" when using SRAM.
"1-2" Connect TXD1,and RXD1 pins
(required)
Remarks
3-22