Table of Contents
Advertisement
Fasten the user system interface cable head to the IC socket for an FP-100B package on the user
system with the four screws (M2.6
tightened a little at a time, alternating between screws on opposing corners. Take special care, such
as manually securing the IC socket soldered area, to prevent the soldered IC socket from being
damaged by overtightening the screws or twisting the components.
User system
Figure 3 Connecting User System Interface Cable to User System
12 mm; with four flat washers) provided. Each screw should be
x
IC socket
(IC149-100-054-B51
manufactured by
YAMAICHI ELECTRONICS Co., Ltd.)
Screws (M2.6 x 12 mm)
with flat washers
Cable head
Pin 1
7
Advertisement
Table of Contents
