Comfort Adjustments - Pride Mobility CELEBRITY DELUXE Manual

V I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key
switch before adjusting the tiller or the
seat. Never attempt to adjust the tiller or
the seat while the scooter is in motion.
Your scooter is equipped with an adjustable pivoting
tiller.
1. While supporting the tiller, turn the tiller
adjustment knob anticlockwise to loosen the
tiller. See figure 16.
2. Move the tiller to a comfortable position.
3. Turn the tiller adjustment knob clockwise to
secure the tiller in position.
NOTE: In order to fully lower the tiller for
purposes of disassembly or transport, you
must first completely remove the seat. See VII.
"Disassembly and Assembly."
TILLER CONSOLE ANGLE ADJUSTMENT
The tiller console can be adjusted to different angles.
To change the console angle:
1. Loosen the adjustment dial (turn anticlockwise)
and move the tiller console up or down to a
comfortable riding position. See figure 16.
2. Hold the console at that position and tighten
(turn clockwise) the adjustment dial.
ARMREST ANGLE ADJUSTMENT
The armrest angle of your scooter can be adjusted
upward or downward by turning the adjustment dial.
See figure 17.
NOTE: Pivot the armrests upward to make
getting onto and off of your scooter easier
SEATBACK ADJUSTMENT
WARNING! Do not operate your scooter
with the seatback in a reclined position.
WARNING!
pressed firmly against the seatback while
adjusting the angle.
Always keep your
TILLER ADJUSTMENT LEVER
TILLER CONSOLE ADJUSTMENT DIAL
Figure 16. Tiller/Tiller Console Adjustment
Figure 17. Armrest Angle Adjustment
SEATBACK
ADJUSTMENT LEVER
back
Figure 18. Seatback Adjustment
ADJUSTMENT DIAL
19