5 : INSTALLATION
5.1
List of accessories
Item
Fixing brackets (supplied bag - the
shape of the bracket may vary from
one model to another).
Sealing tape (pre-installed).
5.2
Preliminary operations
5.2.1 Safety instructions for installation
Before installing the hob and the oven:
CAUTION: Before carrying out maintenance, cleaning or adjustment operations, the
appliance must be disconnected from the electrical supply.
WARNING: Install the appliances only in a suitable location.
WARNING: Make sure the installation space is flat and level and that there are no
structural obstructions.
WARNING: Make sure the materials adjacent to the installation space are heat resistant.
WARNING: Make sure the appliance is installed in compliance with all the applicable
safety regulations and standards.
WARNING: Make sure the power supply wiring incorporates a switch for complete
disconnection of the supply, positioned in a manner that complies with local regulations
on electrical wiring.
WARNING: Make sure the isolation switch is of the approved type, assuring a contact gap
of at least 3 mm on all poles (or on all active conductors [line] if the local wiring regulations
so allow).
WARNING: The isolation switch must be easily accessible by the user once the appliances
have been installed.
en-38
Image