Table of Contents
Advertisement
Dimensions of the sensor:
•
The device is made on an electronic board in a compact design with a width of 15 mm and a length of 68
mm;
•
In order to increase reliability, the electronic components of the sensor are covered with a polymer film;
•
For ease of installation, a hole with a diameter of 5 mm is made in the sensor housing, and a self-adhesive
surface is applied.;
•
On the board of the device there are two LEDs indicating the operating mode, green - "day", red - "night";
•
The design of the device includes a SW level switch that switches the measuring sensor to different response
ranges, as well as a tuning potentiometer RV1 to adjust the sensor response;
•
To ensure the reliability of the electrical contact connection, when connecting the signal line to the device,
there is a self-locking terminal block J1 on the device board, which provides a constant pressure contact
throughout the entire service life.
Operating status indication
When the light falls on the sensor, the green LED "Day" is triggered, signaling the presence of a luminous flux, in the
absence of a luminous flux, the red LED "nIght" works, signaling the sensor's standby mode.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 4. Sensor overview and main features
[ENG] [813S2] 4. Sensor overview and main features
–
Advertisement
Table of Contents
