Step 2 - NetPing 813S2 User Manual

[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 5. Connection to actuators and initial setup.

Step 2.

To adjust the sensor response to a certain level of light output, it is necessary to adjust the RV1 potentiometer with
a 2.5 mm slotted screwdriver to the desired result.
To fine-tune the sensitivity of the light sensor, it is recommended to make settings near an adjustable light
source in conjunction with a trusted luxmeter.
[ENG] [813S2] 5. Connection to actuators and initial setup.
–