[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 1. Introduction [ENG] [813S2] 1. Introduction This user guide helps to become familiar with an operation of a NetPing Light Sensor 813S2 device and get an idea about its functionality and technical specifications as well as prepare a device for an operation.
User Guide, as well as firmware and software of devices and this User Guide belong to NetPing global Ltd. Copying, replication and translation of this user guide to other languages are not allowed without a prior written permission of a rightholder.
[ENG] [813S2] 4. Sensor overview and main features Sensor purpose NetPing light sensor 813S2 is a compact sensor for sharing with NetPing host devices presented on the website www.netpingdevice.com The device can be used to ensure the security of remote border infrastructure (analogous to the operation of the reed switch, only by light), monitor access to the room, to the cabinet, to the protected object, and also use it to reserve the door sensor when the reed switch inside the door opening sensor does not work for some reason.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 4. Sensor overview and main features Dimensions of the sensor: • The device is made on an electronic board in a compact design with a width of 15 mm and a length of 68 •...
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 5. Connection to actuators and initial setup. [ENG] [813S2] 5. Connection to actuators and initial setup. Description of terminals For the convenience of connecting sensors to the device, a terminal block is used. To fix the wires in the pad, use a slotted screwdriver with a slot width of 2.5 mm.
Installation and connection The light sensor can be mounted on a horizontal or vertical surface. The device has outputs of the "dry contact" type with a normally open contact and is connected to NetPing devices like all sensors of this type.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 5. Connection to actuators and initial setup. For detailed information on connecting this sensor to the connected device, see the manual of the tail device in the section "Connecting devices of the "Dry contact" type.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 5. Connection to actuators and initial setup. Step 2. To adjust the sensor response to a certain level of light output, it is necessary to adjust the RV1 potentiometer with a 2.5 mm slotted screwdriver to the desired result.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 6. Warranty [ENG] [813S2] 6. Warranty The manufacturer guarantees normal operation of the product within 24 months from the date specified on the warranty sticker if a buyer follows operating and storage conditions. Manufacturer warranty applies only to failure of a device which occurred because of defects in manufacturing process of products and components used.
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 7. Precautions [ENG] [813S2] 7. Precautions The next information will allow users to avoid both injuries and damaging a device as well as connected equipment. • A device must be used only in a power supply network, indicated by a manufacturer. Using any other power supply types may lead to damaging a device;...
[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 8. Operating and storage conditions [ENG] [813S2] 8. Operating and storage conditions The sensor is designed for continuous round-the-clock operation in enclosed spaces. In the operating conditions of application, the sensor is resistant to air temperatures from -30 ° C to +50 ° C (without condensation of moisture, at normal humidity).