NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Introduction This guide will help you to get to know the features of the NetPing Supply Voltage Sensor 995S2 , get an idea of its functionality and technical specifications, and prepare the device for operation.
User Guide, as well as firmware and software of devices and this User Guide belong to NetPing global Ltd. Сopying, replication and translation of this user guide to other languages are not allowed without a prior written permission of a rightholder.
Page 6
NetPing server room environmental monitoring solutions and IP power distribution units. Device specifications Meaning Threshold r esponse (valid only for 995S2 modification 178–193 V intended for 220 V network) Threshold release (valid only for 995S2 modification, inte 155 175 V –...
NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Installation and Connection The supply voltage sensor can be installed on a horizontal or vertical surface. Mounting holes are not provided. When you install the device, the following restrictions must be considered: Do not expose the device to direct sunlight.
Page 11
Sensor Connection Diagrams The sensor output is a dry contact. The connection order of the N-NC or N-NO wires is not important. NetPing 2/PWR-220 v3/ETH, NetPing 2 IP PDU ETH 53R14, NetPing 2 IP PDU GSM3G 203R15 NetPing 2/PWR-220 v3/ETH —...
Page 12
NetPing server room environmental monitoring solutions and IP power distribution units. Sensor Loop Device Terminal Black (common) Red (N.C.) I 1...4 White (N.O.) I 1...4 UniPing server solution v3, UniPing server solution v4/SMS UniPing server solution v3 — http://www.netpingdevice.com/products/uniping-server-solution-v3 UniPing server solution v4/SMS —...
Page 13
NetPing server room environmental monitoring solutions and IP power distribution units. Белый (N.O.) IO 1...8 NetPing IO v2 NetPing IO v2 — http://www.netpingdevice.com/products/netping-io-v2 Sensor Loop Device Terminal Black (common) Red (N.C.) IO 1...4 White (N.O.) IO 1...4 NetPing 8/PWR-220 v4/SMS NetPing 8/PWR-220 v4/SMS —...
NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Shipping Kit of the Device This shipping kit includes: NetPing Supply Voltage Sensor 995S2 with the soldered wire of 1.5 meters long — 1 pc.; Quick Start Guide — 1 pc.;...
NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Warranty The manufacturer guarantees normal operation of the product within 24 months from the date specified on the warranty sticker if a buyer follows operating and storage conditions. Manufacturer warranty applies only to failure of a device which occurred because of defects in manufacturing process of products and components used.
NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Safety Precautions The next information will allow users to avoid both injuries and damaging a device as well as connected equipment. The device should only be used on the power supply specified by the manufacturer. Use of any other type of power may damage the product.
NetPing server room environmental monitoring solutions and IP power distribution units. [ENG] [995S2] Operating and storage conditions This sensor is designed for continuous round-the-clock operation indoors. The sensor is resistant to air temperature from -30 °С to +50 °С (without moisture condensation, at normal humidity) under operating conditions. The sensor should be protected from the impact of moisture and direct sunlight.