[ENG] NetPing Light Sensor 813S2, User guide -[ENG] [813S2] 5. Connection to actuators and initial setup.
[ENG] [813S2] 5. Connection to actuators and initial setup.
Description of terminals
For the convenience of connecting sensors to the device, a terminal block is used. To fix the wires in the pad, use a
slotted screwdriver with a slot width of 2.5 mm. Pinout of the contacts on the terminal block is as follows:
Sensor terminal
1
2
Sensor Loop (coloured)
White - Open collector
Black - GND
Device terminal
One of the IO or INPUT lines
GND
[ENG] [813S2] 5. Connection to actuators and initial setup.
–