Table of Contents
Advertisement
User Guide for XENSIV™ KIT PAS CO2
Hardware description
running on the CM4 core. The Wi-Fi scan function is shared by both the cores and this situation arises when the
CM4 is unable to get access to Wi-Fi scan.
Possible solution:
This issue does not have any implication on any other feature but only on the location service feature. The
nodes will not be seen on a map. If this issue arises, reset the node so that the CM4 node is able to successfully
scan the Wi-Fi networks and the fleet monitoring service can get the device details.
SSID "IFX_Sensor" cannot be altered
12.
Possible cause:
This is the default SSID and password created to create a quick hotspot.
Possible solution:
A personalized hotspot can be created or add your local network and select the same while building the
package.
"program_kit.command" not closing down after programming
13.
Possible cause:
Macintosh OS is not allowing the window to close on its own.
Possible solution:
Close the terminal after "[Process Completed]" appears on the screen.
List of attributes with their definition and possible values.
Note:
The string value of each attribute is case sensitive.
The attributes listed below are common for applications and cannot be changed in the 'Attribute' tab. The
14.
table below identifies and defines each of them. A user can visualize the value in the 'Reported value'
column.
Common attributes
Table 8
Attribute name
ConnectedStatus
LocationSharing
Unit
-
-
48 of 54
Definition
Reported value shows if
your device is connected
to the sensor cloud or
not
Location sharing status,
so you can visualize
where your device is
located
Range of values
Connected,
Disconnected
0 or 1
Default value is 1; that
means location sharing
is enabled
If user do not want to
share location, please
contact Infineon sales
person for disabling this
feature
2022-25-04
Advertisement
Table of Contents
