Hardware Details; Wing Board Schematics - Infineon XENSIV CSK PAS CO2 User Manual

User Guide for XENSIV™ KIT PAS CO2
Hardware description
5.2.4

Hardware details

The design of the shield was realized using the Altium PCB design tool. The Altium design files are available on
request.
5.2.4.1

Wing board schematics

Sensors
5.2.4.1.1
Figure 44 and Figure 45 shows the schematic of the XENSIV™ PAS CO2 sensor and of the XENSIV™ DSP368.
Figure 44 Schematic of Infineon CO
Figure 45 Schematic of Infineon DPS pressure sensor
Adafruit-feather headers
5.2.4.1.2
Figure 46 shows the pin assignment of J1 and J2 on the PAS CO2 wing board. The Adafruit feather-compatible
header is used to plug into the CYCBSYSKIT-DEV-01 rapid IoT connect developer kit.
PAS sensor
2
39 of 54
2022-25-04