Table of Contents
Advertisement
User Guide for XENSIV™ KIT PAS CO2
Hardware description
5.2.2.1
Power supply
The kit can be powered from a 3.7 V LiPo battery or via a USB cable from an external 5 V power supply. The
battery is automatically charged when the system is connected to an external power supply. Both the IoT
baseboard and the the PAS CO
adaption is needed by the user.
Note: The radar wing board must be manually switched to either battery or external 5 V supply – refer to the
radar wing board user guide for more details.
5.2.3
Mechanical buttons
Table 6
Abbreviations used in this document
Abbreviation
RST
BTN
wing board switch automatically to the provided power supply, so no manual
2
38 of 54
Description
System reset
User button, executed function can be individually
programmed by user
2022-25-04
Advertisement
Table of Contents
