4. Safety functions
4.1. Emergency stop
On the left hand side, you will find the emergency stop
(See figure 17). Operate this button in an emergency; if
he upward or downward movement must be stopped
immediately . Once the emergency stop has been pressed,
the electronic controls will stop working . Operation may
be continued once the situation is stable again . Turn the
emergency stop a quarter turn to unlock it again (See
figure 18).
Check whether the danger has passed or the problem
has been resolved before resetting the emergency
stop.
The orange LED light on the manual control will flash
when the emergency stop has been activated.
4.2. Sleep setting
After around an hour, the chair will fall into a 'sleep' setting and the battery indication
LEDs on the manual control will go out . In order to use the chair again, it must be
activated (See paragraph 2.2. Activating).
4.3. Emergency lowering
If the controls stop working and the chair is in a raised
position, it can be lowered using the emergency lowering
button .
Check first to make sure the chair is not in sleep setting!
• Remove the plug from the manual control (1)
(See figure 19) .
• Press the emergency lowering button (2) (See figure 19) .
The chair will now return to the lowest position (make sure no persons or objects are
under the chair) . Take the client from the chair and make sure the device is not used
until it has been repaired . Place the chair in a safe place and indicate that it is out of
order .
Elexo XXL Shower-toilet chair | Instructions for use | 17
Figure 17 Emergency stop .
Figure 18 Emergency stop .
2
1
Figure 19 Emergency lowering
button .