Table of Contents
Advertisement
Static Electricity Precaution
CAUTION! This device contains static-sensitive circuit cards and components.
Improper handling of these devices or printed circuit cards can result in damage to
or destruction of the component or card. Such actual and/or consequential damage
IS NOT covered under warranty and is the responsibility of the device owner.
Electronic components must be handled only by qualified electronic technicians
who follow the guidelines listed below.
WARNING! ALWAYS use a properly grounded wrist strap when handling, removing,
or installing electronic circuit cards or components. Make certain that the wrist strap
ground lead is securely attached to an adequate ground. If you are uncertain of the
quality of the ground, you should consult a licensed electrician.
ALWAYS handle printed circuit card assemblies by the outermost edges.
NEVER touch components, component leads, or connectors.
ALWAYS observe warning labels on static protective bags and packaging and never
remove the card or component from packaging until ready for use.
ALWAYS store and transport electronic printed circuit cards and components in anti-
static protective bags or packaging.
FCC Compliance Statement
This equipment generates uses, can radiate radio frequency, and if not installed and used in
accordance with the instruction manual, may cause interference to radio communications. It
has been designed within the limits for a Class A computing device pursuant to Subpart J of
Part 15 of FCC rules to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a residential area may
cause interference, in which case the user will be responsible to take whatever measures are
necessary to correct the interference.
You may find the booklet "How to Identify and Resolve Radio-TV Interference Problems"
prepared by the Federal Communications Commission helpful. It is available from the U.S.
Government Printing Office, Washington, D.C. 20402. The stock number is 001-000-00315-4.
Copyright
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to the
use of the information contained herein.
Disclaimer
While every precaution has been taken in the preparation of this manual, the Seller assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained herein. All instructions and diagrams have been
checked for accuracy and ease of application; however, success and safety in working with
tools depend to a great extent upon individual accuracy, skill, and caution. For this reason, the
Seller is not able to guarantee the result of any procedure contained herein. Nor can they
assume responsibility for any damage to property or injury to persons occasioned from the
procedures. Persons engaging in the procedures do so entirely at their own risk.
IV
II
3601-0810-0M Rev C • SB550
Advertisement
Table of Contents
