Special Notes On Safety For Wireless Routers - Digi Utility Installation Manual

About the Digi Utility Communication Hub for the TransPort® WR21
Note A licensed electrician may be required to install or perform maintenance on this equipment.
Always follow applicable local, state and federal codes and guidelines.
WARNING! RISK OF ELECTRIC SHOCK: Always disconnect the mains AC voltage prior to
any work on this equipment.
WARNING! An appropriate external disconnect device must be installed and properly
marked to ensure that an electrical hazard is not present.
WARNING! Bonding between conduit and Protected Earth (PE) is required and must be
part of the installation.
WARNING! Conduit hub.
WARNING! Mounting the device vertically will ensure proper orientation. Cover screws
are required as part of the safety rating.

Special notes on safety for wireless routers

Digi International products are designed to the highest standards of safety and international
standards compliance for the markets in which they are sold. However, cellular-based products
contain radio devices which require specific consideration. Please take the time to read and
understand the following guidance. Digi International assumes no liability for a user's failure to comply
with these precautions.
Digi Utility Communication Hub for TransPort® WR21 Installation Guide
Special notes on safety for wireless routers
6