English (GB) Installation and operating instructions
Original installation and operating instructions
Table of contents
1.
1.1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.2
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
2.2
2.3
2.4
2.5
2.6
2.7
parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.8
2.9
dosing system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1
Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2
3.3
3.4
3.5
3.6
3.7
Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.8
3.9
Dosing medium . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.
4.1
Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.3
4.4
Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.
5.1
5.2
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.3
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.4
Stroke volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.5
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.6
6.
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.1
6.2
6.3
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
6.4
6.5
6.6
6.7
6.8
7.
7.1
7.2
7.3
7.4
7.5
8.
8.1
8.2
Start-up/subsequent start-up of DMH 251, 252 and 253 . . 30
8.3
8.4
8.5
8.6
8.7
Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
4
9.
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
9.1
9.2
9.3
9.4
9.5
9.6
10.
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
10.6 Replacing the diaphragm and gear oil for dosing head
with single diaphragm (no diaphragm leakage
detection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
11.
12.
Dosing curves . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
13.
1. General information
Read this document before you install the product. Instal-
lation and operation must comply with local regulations
and accepted codes of good practice.
1.1 Introduction
These installation and operating instructions contain all the
information required for starting up and handling the DMH 25X
piston diaphragm dosing pump.
If you require further information or if any problems arise, which are
not described in detail in this manual, please contact the nearest
Grundfos company.
1.2 Applications
The DMH 25X pump is suitable for liquid, non-abrasive and non-
flammable media strictly in accordance with the instructions in this
manual.
Explosion-proof pumps are identified from the pump and
motor nameplates. An EC declaration of conformity is pro-
vided in accordance with the EC directive 2014/34/EU, the
Note
so-called ATEX directive. This declaration of conformity
replaces the declaration of conformity in this manual.
Warning
To operate a pump which has been identified as an explo-
sion-proof pump for the dosing of inflammable media or
for operation in potentially explosive operating sites in ac-
cordance with the EC directive 2014/34/EU, refer to the
enclosed manual "ATEX-approved pumps" in addition to
this manual.
Warning
Other applications or the operation of pumps in ambient
and operating conditions, which are not approved, are
considered improper and are not permitted. Grundfos ac-
cepts no liability for any damage resulting from incorrect
use.