Table of Contents
Advertisement
SUPPLY SPINDLE
TAKE UP SPINDLE
`CLICK'
3 3 . . Load ribbon onto the supply spindle
(under print head carriage) and empty
core (with tape attached) onto the take-
up spindle. Make sure the ribbon comes
off the top of the supply spindle and
feeds to the top of the take-up spindle.
4 4 . . Push down on the Print Head Lock
Lever until an audible 'click' signals the
locked-down position.
5 5 . . Close Cover.
Please note that the ribbon automatically synchro-
nises whenever the print head lock down occurs.
2.3
Advertisement
Table of Contents
