Table of Contents
Advertisement
3. System Configuration
Keypad DTMF Type: set DTMF type. User can select DTMF type VIP-152T transmits.
-
RFC2833 Payload Type: change RFC2833 Payload type. This is for special request from the other
-
site, if RFC2833 payload types of 2 sites are different, it may cause some problem of connection.
-
Inter Digit Time: Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out. If after the duration
user hasn't pressed next number, VIP-152T will dial out all number pressed.
End of Dial Digit: select end of dialing key, e.g. set end of dial key as * button, after finished
-
pressing dialing number then press * will dial out.
PLANET VIP-152T User's Manual
21
Advertisement
Table of Contents
