Table of Contents
Advertisement
After change any settings, please remember to reboot (in Reboot System) VIP-152T so that
Note:
changes can take effect.
1. Network Interface
-
IP Address: Set IP Address of VIP-152T
-
Subnet Mask: Set the Subnet Mask of VIP-152T
Default routing gateway: Set Default routing gateway of VIP-152T
-
Get IP Mode: User has to set VIP-152T to use which network mode.
-
1. Fixed IP: User has to assign a fixed IP to VIP-152T.
2. DHCP: When DHCP function enables, VIP-152T will automatically search DHCP server after
reboot.
3. PPPoE: If VIP-152T is working with PPPoE connection, user have to set related parameters in
"PPPoE Configure "page.
If User set "Get IP mode" as DHCP or PPPoE, IP address, Subnet Mask, and Default routing
Note:
gateway will become 0.0.0.0 and not allow to be configured.
SNTP: Enable / Disable the Simple Network Time Protocol function
-
SNTP Server Address: Set SNTP Server Address
-
When SNTP server is available, enable VIP-152T SNTP function to point to SNTP server IP
address so that VIP-152T can get correct current time.
PLANET VIP-152T User's Manual
17
Advertisement
Table of Contents
