Planet Networking & Communication VIP-152T User Manual page 14

2. Get IP Mode
Set network mode of VIP-152T to be Fix (Fixed IP), DHCP, or PoE (PPPoE).
3. IP address
Set IP address of VIP-152T.
4. Subnet Mask
Set subnet mask address of VIP-152T.
5. Default GW
Set default gateway address of VIP-152T.
6. DNS (Domain Name Server)
Set IP address of Domain Name Server. Once VIP-152T can connect to DNS server, user
can set URL address for Proxy server or Phone book instead of IP address.
(1) Primary
(2) Secondary
(3) Exit
7. PoE Config (PPPoE Configuration)
(1) User Name
Set PPPoE connection authentication user name.
(2) Password
Set PPPoE connection authentication password.
(3) Reconnect
Select ON or OFF to enable or disable this function. If user enables this function, after
PPPoE disconnected, VIP-152T will automatically reboot to re-connect, and after reboot,
if VIP-152T still can't connect with server, VIP-152T will keep trying to connect. On the
other hand, if user disables this function, VIP-152T won't reboot and keep trying to
connect.
(4) Exit
Return to upper level of LCD Menu
8. IP-Sharing
PLANET VIP-152T User's Manual
Mode: Display current network connection mode of VIP-152T to be Static (Fixed
IP), DHCP, or PPPoE.
IP, Mask, Gateway: display current IP information.
Set Primary DNS server IP address
Set Secondary DNS server IP address
Return to upper level of LCD Menu
If VIP-152T is behind IP sharing or NAT device, and VIP-152T is under
11