Flush Wall Mounting; Parts To Be Used; Wall Opening Dimensions - Daikin intelligent Touch Manager Installation Manual

3.2

Flush wall mounting

3.2.1

Parts to be used

To flush-mount the intelligent Touch Manager to the wall, use the following accessory
mounting parts:
• Frame bracket, 1 pc.
• Angle bracket, 2 pcs.
• Flat-head screw (M4×40), 4 pcs.
• Pan-head screw (M4×14, with spring washer and plain washer), 4 pcs.
(Check that there are all accessories listed in section 1.1: see the accessories included
with intelligent Touch Manager C.)
3.2.2

Wall opening dimensions

Use the following dimensional drawing to provide a sufficient opening.
NOTE
• The supplied paper template helps you mark the dimensions of the required wall
opening.
• Use the supplied paper template (Flush wall mounting).
<Wall opening dimensions for flush wall mounting>
8-13/16
A
B
C
D
E
English
4
8-5/16
Inner wall material
Beams of building (frame)
intelligent Touch Manager
2-3/8 in. min.
Opening
Installation Manual 3P291714-2B
DCM601A71 intelligent Touch Manager
10-5/32
E E
9-1/2
B
A
C
D
(in.)
27