Installation In Horizontal Sliding Windows - Hisense AP-10DR2SFTS10 Use And Installation Instructions

Insert
Align the tabs on the window exhaust
adapter with the slots in the vent panel.
Insert the window exhaust adapter into the
opening in the vent panel.
NOTE:
The window installation kit can be used with horizontal sliding windows between 28" and 81½" wide.
Foam seal K
(Adhesive
type)
Cut the foam seal K(adhesive type) & L
{adhesive type-shorter)to the proper
length, and attach it to the window sash
and frame.
(Non-adhesive type)
Cut the foam seal A(Non-adhesive type)
to the window width. Stuff the foam seal
A between the glass and the window to
prevent air and foreign objects from
getting into the room.

Installation In Horizontal Sliding Windows

A
10
Sc ew
Insert the screw in the hole in
the window exhaust adapter to
prevent the window exhaust adapter
from sliding out of the vent opening.
Extension panel
(if required)
Vent
Panel
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if
used.
Install the Window-lock bracket with a type F
screw as shown if you need.