Installation In Horizontal Sliding Windows 10 - Hisense AP1019CW1G Use And Installation Instructions

Insert
Align the tabs on the
with the slots in the vent panel.
adapter
Insert the
window exhaust adapter
opening in the vent panel.
NOTE: The window installation kit can be used with horizontal sliding windows between 18'' and 50'' wide.
Foam seal L
(Adhesive
type-shorter)
Cut the foam seal L(adhesive type) & M
(adhesive type-shorter)to the proper
length, and attach it to the window sash
and frame.
Cut the foam seal A(Non-adhesive type)
to the window width. Stuff the foam seal
A between the glass and the window to
prevent air and foreign objects from
getting into the room.
Slot
window exhaust
into the
Installation In Horizontal Sliding Windows
Foam seal M
(Adhesive
type-shorter)
A
Insert the screw in the hole in
the
window exhaust adapter
prevent the
from sliding out of the vent opening.
F
Install the Window-lock bracket with a type F
screw as shown if you need.
10
Screw
to
window exhaust adapter