Specifications - Makita 4326 Instruction Manual

ENGLISH
1-1. Cutting action changing lever
2-1. Switch trigger
2-2. Lock button
3-1. Speed adjusting dial
4-1. Blade holder
4-2. Bolt
4-3. Hex wrench
5-1. Bolt
5-2. Blade
5-3. Roller
6-1. Hook
6-2. Hex wrench
7-1. Blade

SPECIFICATIONS

Model
Length of stroke
Blade type
Max. cutting
capacities
Strokes per minute (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
Explanation of general view
7-2. Roller
7-3. Retainer
7-4. Hex wrench
7-5. Bolt
7-6. Base
8-1. Dust cover
9-1. Cutting line
9-2. Base
11-1. Hex wrench
11-2. Bolt
11-3. Base
12-1. Edge
12-2. Graduation
Wood
Mild steel
-1
)
217 mm (Steel base type)
223 mm (Aluminum base type)
1.8 kg (Steel base type)
1.9 kg (Aluminum base type)
equipment and
environmentally compatible
4326
18 mm
65 mm
6 mm
3,100
217 mm (Steel base type)
223 mm (Aluminum base type)
1.8 kg (Steel base type)
1.9 kg (Aluminum base type)
/II
END201-3
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model 4326,4327
For European countries only
its
Noise
The typical A-weighted noise level determined according
to 60745-2-11:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
ENE019-1
Vibration
The vibration
determined according to EN60745-2-11:
4
13-1. Hex wrench
13-2. Bolt
13-3. Base
14-1. Starting hole
17-1. Dust cover
17-2. Hose
18-1. Anti-splintering device
18-2. Protrusions
19-1. Anti-splintering device
19-2. Aluminum base
20-1. Cover plate
20-2. Aluminum base
4327
18 mm 18 mm
B type
65 mm 65 mm
6 mm
500 - 3,100 500 - 3,100
217 mm
1.8 kg
/II
) : 86 dB(A)
pA
) : 97 dB(A)
WA
Wear ear protection
total value
4328 4329
18 mm
65 mm
6 mm 6 mm
500 - 3,100
223 mm
1.9 kg
/II /II
ENF002-1
ENG102-1
ENG220-1
(tri-axial vector sum)