Advertisement
Quick Links
Owner Manual
Winton Bale Spike
WBS
IMPORTANT: Read all instructions before using this attachment
Congratulations on the purchase of your new attachment!
Before you get started, we have provided a helpful space to jot down a
few important details:
Model number: WBS01
Serial number:
Date of purchase:
Factory reference: BS01
This manual should be considered a permanent part of this attachment
and therefore should remain with it even if the attachment is
subsequently sold.
The manufacturer continually seeks advancements in its product design
and quality. Therefore, while this manual contains the most current
product information available at the time of printing, there may be minor
discrepancies between your attachment and this manual.
If you have any questions concerning this manual, please consult your
local dealer.
Specifications
Model:
Weight:
Recommended Tractor HP:
Linkage Size:
Max. load:
WBS01
35kg
20-50hp
Category 1
450kg
2
Advertisement
Related Manuals for Winton WBS01
Summary of Contents for Winton WBS01
- Page 1 Congratulations on the purchase of your new attachment! Before you get started, we have provided a helpful space to jot down a few important details: Model number: WBS01 Owner Manual Serial number: Date of purchase: Winton Bale Spike Factory reference: BS01...
- Page 2 Safety Information Safety Information (continued) Before installation/maintenance, ensure tractor and attachment are Attachment Pre-Use Checks stationary with the hydraulic lift system in a neutral position, and the ignition key removed. Read and understand this manual before Upon receipt of your new attachment and again within the first 4 hours of operating any machinery to avoid equipment damage.
- Page 3 Contents Specifications…………………………………………………………………………………..page 2 Safety Information………………………………………………………………………..page 3-4 Installation…..…………………………………………………………………………………..page 5 Parts Diagram & List………………………………………………………………………..page 6 Winton Product Warranty………………………………………………………………..page 7 Installation Before installation ensure tractor/attachment are stationary with the hydraulic lift system in a neutral position, and the ignition key removed. Firstly, position your tractor on flat ground, then lower the tractor’s 3- point linkage to its lowest position.
- Page 4 Terms & Conditions All products purchased as new are covered under our 12 month warranty from the date of purchase. During this period Winton will repair or replace defective parts free of charge. This warranty is given on the proviso that the product has been used and maintained according to the Owners Manual.
Need help?
Do you have a question about the WBS01 and is the answer not in the manual?
Questions and answers