Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Science Image NDI Studio 4K SH
Summary of Contents for Science Image NDI Studio 4K SH
- Page 1 USER MANUAL NDI Studio 4K SH S H...
- Page 2 READING BEFORE USE If you find that some functions are unavailable in future use, you need to check the following to find out whether it is caused by improper operation or settings: Please use the officially designated adapter. If you cannot log in to the WebUI, please check whether the device's IP is in the same network segment as the computer's IP address, and whether the device's IP address conflicts with the IP addresses of other devices in the network segment.
-
Page 3: Table Of Contents
CONTENTS Studio 4K Application Topology ---------------------------------------------------- ® Studio 4K interface and indicator ---------------------------------------------------- ® Three ways to power on and connect to LAN ------------------------------------------------ OLED screen display instructions --------------------------------------------------------- Login Web UI ------------------------------------------------------------------------- -------------------------------------------------------------------- Device Information --------------------------------------------------------------------- Network settings -------------------------------------------------------------------- Modify the IP ------------------------------------------------------------------ 7.1.1... -
Page 4: Ndi Studio 4K Application Topology
1. NDI Studio 4K Application Topology NDI Encoder Application Topology Encoder HDMI Mixing console Mixing console LINE IN LINE IN External audio External audio Video Source embedding NDI Decoder Application Topology Decoder HDMI HDMI Headset/Mic Headset/Mic All NDI Source NDI audio and external audio De-Embeding UpDown conversion Application Topology SDI to HDMI Up conversion SDI OUT... - Page 5 HDMI to SDI Down conversion HDMI IN SDI OUT HDMI OUT Encoder Encoder Encoder Encoder 1080i59.94 2160p50 1080i59.95 Optical Transceiver Application Topology Optical Transceiver Application Topology Optical Transmitter / Receiver Optical Transmitter / Receiver Optical fiber Optical module Optical module Optical module Transimtter/1080i50 Receiver/2160p60...
- Page 6 Audio Embedding/De-Embedding Audio Embedding/De-Embedding Application Topology Application Topology NDI Encoder NDI Encoder NDI Decoder Headset/Mic Headset/Mic Mixing console Mixing console LINE IN LINE IN LINE IN External audio External audio embedding NDI audio and external audio De-Embeding Audio control and volume adjustment Audio control and volume adjustment Audio control and volume adjustment Optical Transmitter...
-
Page 7: Ndi ® Studio 4K Interface And Indicator
2. NDI Studio 4K interface and indicator introduction SDI input:SDI signal input interface (Studio 4K·H does not have this interface) SDI output:Encoder is looped out picture, decoder is decoded output picture (Studio 4K·H does not have this interface) HDMI input:HDMI input signal (Studio 4K·S does not have this interface) HDMI output:The picture is looped out in the encoding state,and the output picture is decoded in the decoding state(Studio 4K·S does not have this interface) Optical input/output:SMPTE optical fiber SFP socket, used to connect different types of Gigabit/10... -
Page 8: Three Ways To Power On And Connect To Lan
Always use a certified 802.11 af/at with minimum 10W port power capacity and it's a gigabit network switch. After startup, you will find that the character SCIENCE IMAGE Tech begins to appear on the OLED screen, and the power light on the right starts to light up. -
Page 9: Login Web Ui
First Line---NDI Encoder / NDI Decoder/Optical Transmit Displays the current NDI ® Studio 4K working modes: Encoding or Decoding. The receiver or sender of the optical transceiver can only be used in coded mode. Second Line---NDI Source Name / Primary HDMI/SDI Selection In encoding mode, will displayed NDI stream name such as "NDI-X"... - Page 10 Open the IE browser, enter the IP address on the OLED screen and enter the Web UI home page Default user admin admin name: Password: Method 2: Open the login page through NDI Studio Monitor The first step: Download and install the free NDI® tool-NDI Studio Monitor on NewTek'sofficial website. Download link: "https://ndi.tv/tools"...
-
Page 11: Device Information
6. Device Information This page is the NDI® Studio 4K device information page, which contains the following information: Device running time (since power-on), the video resolution and audio frequency of the HDMI source or SDI source of the current encoding input (or the format of the decoded NDI video stream Informa- tion). -
Page 12: Dhcp Mode
There are two modes for device IP address setting: DHCP and manual. 7.1.1 DHCP mode The router dynamically assigns an IP address to the device in real time. Each time the device is powered on, the ROUTER randomly assigns an IP address to the device. You can log in to the web page and modify the IP address based on the IP address assigned by the router. -
Page 13: Ndi Discovery Server Settings
7.2 NDI discovery server settings NDI discovery server can transfer video stream across network segments. To use this function, you need to use the official websiteof newtek（ https://www.ndi.tv/sdk/ Download and install NDI SDK and NDI tools.) Step 1: open NDI discovery service and record the IPv4 address of this computer (for example: 192.168.1.106). Sources represents the number of encoders connected to the server, and listeners represents the number of decoders connected to the server. -
Page 14: Ndi Multicast Settings
NDI defaults to public group. If you want to add a new group, separate it with comma ",". You can also create a separate privacy group, such as science image, so that only the device that also fills in the science image... -
Page 15: Video Format Conversion
8. Encoding settings Encoder setting page can set the output format of video, stream name of video source,aspect ratio of picture, frame rate, code rate,tally light switch, NDI encoder volume and optical transceiver. 8.1 Video format conversion No matter what the input format is, you can convert the output to the corresponding format by clicking the following format. -
Page 16: Set The Screen Aspect Ratio
8.3 Set screen aspect ratio Supports five screen aspect ratio settings: source aspect ratio, 4:3, 16:9, 16:10, square. 8.4 Set frame rate Support 4 kinds of frame rate settings: source frame rate, 1/2 frame rate, 1/3 frame rate, 1/4 frame rate. 8.5 Set bitrate (Bandwidth) The adjustment of bit rate can be reduced to save network bandwidth when the requirement of image quali- ty is not very high... -
Page 17: Set Up Tally Lights
8.7 Logo background image upload streaming If it is in the encoding state, users can choose to set the logo background image as the image stream accord- ing to the actual needs. Click the image to add a local file,and then click Save to start the stream pushing. If not, click end stream pushing. -
Page 18: Input Source Priority Selection
8.10 Input source priority selection When both SDI and HDMI sources are input at the same time, the HDMI source is preferred by default. If you want to select the preferred SDI source, click SDI application. When there is only one source, it will be auto- matically recognized and will not be affected by this setting. -
Page 19: Decoder Settings
The frame rate of the video format conversion of both sender and receiver should be integer or decimal! Otherwise, the transmission fails. For example, if the transmitting end converts 2160p60, the receiving end must select 2160p50, 1080p50, and 1080p23.98. Similarly, if the send- ing end is a decimal, the receiving end must also be in decimal format. -
Page 20: Select Ndi Source In Decoding State
9.2 Select NDI source to decode in decoding state If this device is used as a decoder, you need to select an NDI source to decode and output.Setting steps: ① Log in to the WebUI of the decoder ② Click [Network] ③... -
Page 21: Reset Login Password
10.1 Reset login password Modify the login password and click apply. After the password is modified, it will take effect at the next login. 10.2 Restore factory settings Restoring factory settings can restore the device to its initial state, but the firmware version will not be restored (the factory default IP address of the device is DHCP manual mode. -
Page 22: Firmware Upgrade
10.3 Firmware upgrade New firmware upgrades will be released regularly on the company's official website. Users can download the latest firmware to upgrade as needed. Download address:“ http://www.science-image.com/cn/- file-123084-92200.html ”After downloading, you canclick the [open upgrade page] button on the [system] page to enter the upgrade page, orclick the figure icon in the upper right corner, and then click the [firmware upgrade] button Just push the button. -
Page 23: Working Mode Switch
After the progress bar reaches 100%, the upgrade page is closed and the device restarts. Then, log in to the WebUI again and check the firmware version to check whether the upgrade is successful. During the upgrade, do not switch off the power supply or close the upgrade page. Otherwise, system files may be damaged and the system may fail to start. -
Page 24: Device Restart
10.5 Device restart Click the restart device button under the box restart control to restart the controlled device. 11. Control 11.1 Camera settings Camera type:Select the type of camera and click Connect. -
Page 25: Ptz Control Panel
Serial port baud rate:Select the baud rate of the serial port and click Apply. Camera address︓Select the camera address and click Apply. 11.2 PTZ Control Panel The control panels for PELco-D and PELco-P are shown below:... -
Page 26: Briefly Introduce How To Use Vmix, Studio Monitor Software To View Ndi Video Stream
12. Briefly introduce how to use vMix and Studio Monitor software to view NDI video stream 12.1 How to use vMix to add NDI video stream and view vMix official download address: "https://www.vmix.com/software/download.aspx"Open the vMix software, click [Add Input] in the lower left corner in turn--->[NDI/Desktop Capture]---> double-click the video source you want to view... -
Page 27: How To Use Studio Monitor To View Ndi Video Stream
12.2 How to use Studio Monitor to view NDI video stream Open the Studio Monitor software, click in the upper left corner or right-click anywhere--->【SCIENCEIM- AGE】---> click the name of the NDI stream you want to view... - Page 28 Q. Why can't the device start? A. Check whether the device power indicator (located on the right side of the chassis) and OLED screen are on, and restart again with the official power adapter; Do not turn off the upgrade page and power during device upgrade!! Q.
- Page 29 SCIENCE IMAGE is a trademark of SCIENCE IMAGE Tech. Ltd is a trademark of NewTek, LLC (USA) ®...
Need help?
Do you have a question about the NDI Studio 4K SH and is the answer not in the manual?
Questions and answers