Polaris RANGER XP 1000 2020 Owner's Manual page 46

FEATURES AND CONTROLS
Press and release either toggle button
Area 2 modes. Press and hold either toggle button to reset an item. See page
47.
With the ignition key off, pressing the MODE button or either toggle button will
power up the Rider Information Center for 10 seconds to allow viewing of the
INDICATOR LAMPS
LAMP
44
Downloaded from ManualsNet.com
odometer and the clock.
INDICATES CONDITION
Vehicle Speed When standard mode is selected, speed displays in miles per
hour.
When metric mode is selected, speed displays in kilometers
per hour.
Over This lamp illuminates to indicate an overheated engine. If the
Temperature indicator flashes, the overheating condition remains, and the
system will automatically reduce engine power.
Electric Power This lamp illuminates briefly when the key is turned to the ON
Steering (EPS) position. If the light remains on, the EPS system is
Warning (if inoperative. See your POLARIS dealer, or other qualified
equipped) person, as soon as possible for repair. Continued operation
could result in permanent damage to the EPS unit and
increased steering effort.
Neutral This lamp illuminates when the transmission is in neutral and
the ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high
beam.
Helmet/Seat Belt This lamp illuminates to ensure all riders are wearing helmets
and seat belts before operating. The driver's seat belt is
equipped with a seat belt interlock. Vehicle speed will be
limited to 15 MPH (24 km/h) if the seat belt is not secured.
Check Engine This warning lamp illuminates if an Electronic Fuel Injection
(EFI) related fault occurs. Do not operate the vehicle if this
warning appears. Serious engine damage could result. Your
authorized dealer or qualified person can assist.
search engine
t
to cycle through the options menu or
TIP