Polaris RANGER XP 1000 2020 Owner's Manual page 34

FEATURES AND CONTROLS
USING LOW GEAR
Low gear is the primary driving range for the RANGER. High gear is intended for
use on hard-packed surfaces with light loads. Whenever the vehicle is left
unattended, always place the transmission in PARK.
Always shift into low gear for any of the following conditions.
• Operating in rough terrain or over obstacles
• Loading the vehicle onto a trailer
• Towing heavy loads
SWITCHES
Not all switches are present on every model.
IGNITION SWITCH / LIGHT SWITCH
Use the ignition switch to start the engine and to turn the lights on or off. The key
can be removed from the switch when it is in the OFF position.
OFF
LIGHTS ON
POSITION
LIGHTS ON
START
TURN SIGNAL LEVER
Before turning, activate a turn signal to alert others of your intentions. Check turn
signal lamps before each ride.
The key must be in the ON position to activate the turn signals.
32
Downloaded from ManualsNet.com
Turn the key to the OFF position to stop the engine.
Electrical circuits are off.
All lights are on. Electrical circuits are on. Electrical
equipment can be used.
The headlights are off. Position lights are on.
Electrical equipment can be used.
Turn the key to the START position to engage the
electric starter. See the Starting the Engine section
for details.
TIP
search engine