Polaris RANGER XP 1000 2020 Owner's Manual page 38

FEATURES AND CONTROLS
THROTTLE PEDAL
Push the throttle pedal
returns the pedal to the rest position when released. Always check that the
throttle pedal returns normally before starting the engine.
If the throttle pedal and brake pedal are applied simultaneously, engine power
PARK BRAKE LEVER
Always apply the service brakes
before engaging or releasing the
park brake. To help prevent the
vehicle from rolling, set the park
brake when parking the vehicle.
When the park brake is set and the
park brake indicator is illuminated,
engine speed is limited. If the
accelerator is applied, this limiting
feature prevents operation, which
protects the park brake pads from
excessive wear.
This feature will not operate properly if the park brake connector or switch
(under the top cup holder) malfunctions or becomes disconnected, or if the
switch has moved. Check for disconnection, then see your dealer or other
qualified service person promptly if this feature fails to operate properly.
1. To set the park brake, apply the brakes. Pull the park brake lever
yourself as far as possible.
2. To release the park brake, apply the brakes. Turn the park brake lever
counterclockwise and push it in as far as possible.
SEAT
SEAT REMOVAL
To remove the driver's seat, lift up on the rear of the seat and rotate the seat
base up and forward.
To put the passenger seat into the upright position, lift up on the front of the seat
and raise it to the upright position.
36
Downloaded from ManualsNet.com
w
down to increase engine speed. Spring pressure
TIP
may be limited.
TIP
search engine
q
towards