Polaris RANGER XP 1000 2020 Owner's Manual page 110

Table of Contents

Advertisement

MAINTENANCE
After opening a bottle of brake fluid, always discard any unused portion. Never
store or use a partial bottle. Brake fluid is hygroscopic, meaning it rapidly
absorbs moisture from the air. The moisture causes the boiling temperature of
the brake fluid to drop, which can lead to early brake fade and the possibility of
Change the brake fluid every two years and any time the fluid becomes
contaminated, the fluid level is below the minimum, or if the type and brand of
the fluid in the reservoir are unknown.
1. Position the vehicle on a level surface.
2. View the brake fluid level at the reservoir in the driver's side wheel well. The
level should be between the upper (MAX) and lower (MIN) level lines.
3. If the fluid level is lower than the upper level line, open the hood and add
brake fluid to the upper (MAX) line.
4. Apply the brake forcefully for a few seconds and check for fluid leakage
around the fittings.
108
Downloaded from
ManualsNet.com
WARNING
accident or severe injury.
search engine

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents