MAINTENANCE
2. Rotate the driven clutch and walk the belt into the clutch.
3. Remove the clutch spreader tool from driven clutch.
4. Rotate / spin the driven clutch and belt approximately 5-7 times to properly
seat the belt in the driven clutch.
5. Install the clutch cover into wheel well as shown above.
6. Rotate clutch cover over A-Arm
intake boots or electrical harness.
7. Pull clutch cover backwards and align with bolt holes on inner clutch cover as
shown below.
102
Downloaded from
ManualsNet.com
w
as shown below. Use care not to damage
search engine