Download Print this page

DAVIS Vantage Pro2 Installation Instructions Addendum page 8

Integrated sensor suite with fan-aspirated radiation shield
Hide thumbs Also See for Vantage Pro2:

Advertisement

Operating Temperature . . . . . . . . . . . . –40° to +140° F (–40° to +60° C)
Non-operating Temperature . . . . . . . . . –50° to +158° F (–45° to +70° C)
ISS Primary Power Input
Wireless ISS . . . . . . . . . . . . . . . . . . . . solar panel
ISS secondary power . . . . . . . . . . . . . . CR-123A 3-volt lithium battery (8
Fan Primary Power Input
Wireless ISS . . . . . . . . . . . . . . . . . . . . . solar panel
Fan secondary power . . . . . . . . . . . . . . 1 or 2 - 1.2 Volt NiCad C-cells
FCC Part 15 Class B Registration Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modification not expressly approved in writing by Davis Instruments may void the warranty and void the user's authority
to operate this equipment.
IC: 378810-6328
EC EMC Compliance
This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC.
Addendum, Fan-Aspirated ISS Installation
Rev A Manual (November 10, 2004)
Document Part Number: 7395.252
Product Number:6153, 6163
®
Vantage Pro
and Vantage Pro2
© Davis Instruments Corp. 2004. All rights reserved.
Information in this document subject to change without notice.
are trademarks of Davis Instruments Corp., Hayward, CA.
(Reference: RM Young model
43408)
months without sunlight to greater
than two years depending on solar
charging)

Advertisement

loading

This manual is also suitable for:

Vantage pro2 plus