Pressure Setting - Gage Bilt GB910 Quick Start Manual

PRESSURE SETTING:

The Pressure Checking Gauge Set-Up, part number 942280 is used to check the pressure settings for
PULL and RETURN pressures. Personnel servicing the GB910 Powerunit should be given access to this
gauge set-up.
Replacement couplers are available in a set, part number 585037, which includes one body (female) and
one nipple (male).
Replacement o'ring for the body is part number 404438 and the back-up ring is part number 401102.
7
REV. 10/13