Mixer - Pioneer DDJ-T1 Operating Instructions Manual

For instructions on assigning functions, see Changing the
TRAKTOR Preferences on page 23.
8 DECK button
Switches the deck to be operated.
! Deck on left side of this unit: Deck [A] or [C]
! Deck on right side of this unit: Deck [B] or [D]
9 Filter control
! Turn counterclockwise while filter function is on: Low pass filter.
! Turn clockwise while filter function is on: High pass filter.
a FILTER button
Switches the filter function on/ off.
b MOVE/ HOT CUE selector button
Switches [Move Panel] and [Cue Panel] in the advanced panel.
! To open the advanced panel, click [b] below [ACTIVE] in
TRAKTOR.
c MOVE PANEL/ HOT CUE PANEL
! MOVE PANEL operation
[MOVE MODE] (the loop moving mode) switches each time the
[MODE DELETE] button is pressed.
[Beat Jump]
— [Beat Jump]: The position of playback moves.
— [Loop]: The loop moves.
— [Loop In]: The loop in point moves.
— [Loop Out]: The loop out point moves.
Use the [SIZE c/ d] buttons to set the amount of movement of
the playback position or loop by fractions of the beat.
Use the [c BWD/ FWD d] buttons to move the playback posi-
tion or loop by the amount of movement set with the [SIZE c/ d]
buttons.
! HOT CUE PANEL operation
When a button at which nothing is set is pressed in the play or
pause mode, a hot cue ([1] – [4]) is set at the position at which
the button was pressed.

3 Mixer

GAIN GAIN
BROWSE
4
MIN MAX MIN MAX
HI HI
1
MIN
MIN MAX MIN MAX
MID MID
HEADPHONES
5
EQ EQ
MIN MAX MIN MAX
2
LOW LOW
CUE
MIN MAX MIN MAX
3
6
1 2 1 2
FX FX
MIN
7
CUE CUE
8
SYNC MASTER SYNC MASTER
9
C A
10
9
8
7
6
5
4
3
2
1
a
0
OFF ON OFF ON
b
CH FADER START
c
1 MAIN VOL control
Adjusts the sound level output from the master.
18
En
[Loop] [Loop In] [Loop Out]
PUSH
GAIN GAIN
VIEW
4
MAIN
MIN MAX MIN MAX
HI HI
VOL
MAX
MIN MAX MIN MAX
MID MID
5
EQ EQ
MIX
MIN MAX MIN MAX
LOW LOW
MASTER
VOL
MIN MAX MIN MAX
6
1 2 1 2
FX FX
MAX
7
CUE CUE
8
SYNC MASTER SYNC MASTER
9
B D
10
9
8
7
6
5
4
3
2
1
a
0
OFF ON OFF ON
b
When a button at which a hot cue ([1] – [4]) is set is pressed in
the play or pause mode, a hot cue ([1] – [4]) is called out.
To cancel a hot cue ([1] – [4]), press the corresponding button
([1] – [4]) while pressing the [DELETE] button.
Buttons [1] – [4] at which hot cues are set flash while the
[DELETE] button is pressed.
— To set or call out hot cues [5] to [8], press buttons [1] to [4]
while pressing the [SHIFT] button.
— To delete a hot cue from [5] to [8], press buttons [1] to [4]
while pressing the [SHIFT] and [DELETE] buttons.
— [CUE TYPE] (the type of hot cue) can be changed by clicking
[b] to the left of the [ ] icon.
d KEY LOCK button
Switches the key lock function on/ off.
When the key lock function is on, the key does not change even when
the playing speed is changed with the [TEMPO] slider.
e TEMPO RANGE button
The [TEMPO] slider's range of variation switches each time this is
pressed.
[±6]
f TEMPO slider
! Move towards the + (front) side: The playing speed increases.
! Move towards the – (back) side: The playing speed decreases.
g Jog dial
! Scratch
Spin the jog dial while pressing down on the top: The sound is
played according to the direction and speed of rotation.
! Pitch bend
During playback, spin the outer section of the jog dial.
— Spin clockwise: The playing speed increases.
— Spin counterclockwise: The playing speed decreases.
— Stop spinning: Playback at the normal speed resumes.
1
2
3
5
6
a
4
7
c
2 HEADPHONES MIX control
Adjusts the monitor volume balance between the sound of the deck
for which the [CUE] button is pressed and the sound of [MASTER
OUT 1] and [MASTER OUT 2].
[±10] [±16] [±100]
8
9