Maintenance - EdilKamin FIREBOX DECO Installation, Use And Maintenance Manual

Cleaning the glass
You can use specififi c products to clean the glass (see
our Glasskamin pricelist).
Do not spray the product on painted parts or the
seals of the door. An alternative to the product is a rag
soaked in a bit of white ash and a piece of newspaper.
Attention, ensure there are no abrasive elements in the
ash that could scratch the glass.
Ceramic glass installed on the products can
resist heat up to approx. 750°C and is tested
and controlled before and after assembly to
check for the presence of cracks, bubbles
and blowing.
The glass, despite its high resistance to
temperature, is however a fragile element
and therefore you are advised to move the
door cautiously without banging or forcing it.
Glass, since it is not fl exible, can break.
Ash removal (only with the fifi replace off
and cold)
Remove the ash grille and pull out the tray.
Remove the ash using a scoop or ash cleaner.
Place the removed ash exclusively in non-combustible
containers; bear in mind that the residual embers may
still re-ignite 24 hours after the last combustion.
Don't remove the ash when hot.
Use always the glove hot.

MAINTENANCE

Cleaning the external parts
The covering must be clean without using aggressive
detergents. Do not wet with cold water when the
covering is hot because the thermal shock could
cause damage.
21