Installation Guides - Reolink Argus 2 Operational Instruction

1. Please charge the rechargeable battery with a standard and high-quality DC 5V or 9V battery
charger.
2. If you want to power the battery via the solar panel, please note that the battery is ONLY
compatible with Reolink Solar Panel. You cannot charge the battery with other solar panel brands.
3. Please charge the battery in temperatures between 0°C and 45°C.
4. Always use the battery in temperatures between -20°C and 60°C.
5. Please make sure the battery compartment is clean.
6. Please keep the USB charging port dry, clean and free of any debris and make sure the battery
contacts are aligned.
7. Always make sure the USB charging port is clean. Please cover the USB charging port with the
rubber plug after the battery has been fully charged.
8. Never charge, use or store the battery near any ignition sources, such as fire or heaters.
9. Always store the battery in a cool, dry and ventilated environment.
10. Never store the battery with any hazardous or combustible objects.
11. Do keep the battery away from children.
12. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and
negative (-) terminals. Do NOT transport or store the battery with necklaces, hairpins or other metal
objects.
13. Do NOT disassemble, cut, puncture, short-circuit the battery, or make it dispose of in water, fire,
microwave ovens and pressure vessels.
14. Do NOT use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, remove the battery from
the device or the charger immediately, and stop using it.
15. Always follow the local waste and recycle laws when throwing the used battery away.
12 English

Installation Guides

• Skin (for Argus 2)
Please dress the camera with the skin for better weatherproof performance when you install the
camera outdoors.
Step 1 Step 2
Please dress the Reolink The skin has an anti-falling
Argus 2 camera with the skin safety rope. Please fasten the
provided in the package. other end of the rope to the
wall mount when mounting it
to the wall.
Step 3
Stick the camera on the wall
mount and twist the camera in
any direction.
English 13