AudioSource AMP One/A Owner's Manual

Stereo power amplifier with internal bridging

Download this manual

Owner's Manual

AMP One/A

Stereo Power Amplifier with Internal Bridging

Congratulations on your new purchase and welcome to the AudioSource family of satisfied customers.

We trust you will continue to enjoy the value and quality of your AudioSource AMP One/A for many years

to come. To ensure the best performance from your unit, please take a few moments to read this manual.

Also, be sure to retain this document for future reference.

Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115.

Page 1 Congratulations on your new purchase and welcome to the AudioSource family of satisfied customers. We trust you will continue to enjoy the value and quality of your AudioSource AMP One/A for many years to come. To ensure the best performance from your unit, please take a few moments to read this manual.
Page 2: Front Panel Controls
Bridging Switch (refer to wiring diagram) In addition to providing 80 watts RMS per channel in the stereo mode, your AMP One/A can be used as a high power mono amplifier, providing over 200 watts RMS. This can be accomplished by sliding the bridging switch from the stereo position to the mono position.
Page 3 Connect the line out jacks from a stereo pre- amplifier to the line in jacks of your AMP One/A. Next, connect your speakers to the five-way binding post speaker terminals (observing proper polarity: red for "+", and black for "-").
Page 4: Safety Instructions
All other servicing should be referred to qualified service personnel. Product Servicing In the event that your AMP One/A fails to operated properly, please contact the dealer where you purchased the unit. Or you may contact AudioSource directly for further assistance.