Iwatsu SS-540 Instruction Manual page 9

Read this page to ensure proper safety. (to be continued)
• When handling power cords and sensor cables:
This may result in fire, electric shock, or equipment damage. If the
power cord is damaged, contact Iwatsu office or our sales
distributors for repair.
⋅ Do not attempt to fabricate power cord and sensor cable.
⋅ Do not pull power cord and sensor cable by the cable. Always
grasp the plug.
⋅ Do not bend power cord and sensor cable.
⋅ Do not heat power cord and sensor cable.
⋅ Do not twist power cord and sensor cable.
⋅ Avoid getting power cord and sensor cable wet.
⋅ Do not bind power cord and sensor cable together.
⋅ Do not place heavy objects on top of power cord and sensor
cable.
• Do not use this instrument in a highly humid
environment where condensation may occur.
If using, an electric shock or fire, or failure may occur.
• Do not put on this instrument a container that water,
medicine, etc. has entered or a small metallic object.
If not, an electric shock or fire may occur. If this instrument is wet
with water, or metal and other objects enter the instrument,
immediately turn off the power supply of all equipment with which
this instrument is connected, and then detach this instrument from
the insulating target conductor to be measured. After that, contact
Iwatsu office or our sales distributors for repair.
• When thunder begins, pull out the power plug of a
device or the AC adaptor to which this instrument is
connected from the outlet. Then, detach this instrument
from the target to be measured, and do not use it.
Lightning may be a cause of an electric shock, fire, or failure.
Warnings
5