Iwatsu SS-540 Instruction Manual page 10

6
Read this page to ensure proper safety. (to be continued)
• Do not use this instrument when it has failed.
Using a failed main unit or, cable or AC adaptor may be a cause
of an electric shock or fire. In the event of a failure, contact Iwatsu
office or our sales distributors for repair.
• Do not attempt to modify or disassemble the unit.
This may result in electric shock, fire or equipment damage.
Requests to repair the unit may be refused if unauthorized
modifications have been made.
• This instrument SS-540 and SS-550 might not be able to
be used at the same time because there are restrictions
on power consumption in the probe power on the
oscilloscope side according to the measured current.
Refer to page21 and page27 for details.
• The BNC ground of this instrument is connected to an
electric ground through the power supply such as PS-52
or PS-54 to prevent danger. Use the equipment only for
the floating measurement when executing the floating
measurement.
When the ground terminal of the instrument is connected to a
ground besides the earth potential, this instrument, the equipment
and the circuit to be measured must be damaged because the
equipment that connects this instrument is connected to a ground.
Moreover, there must be danger of getting an electric shock.
Wrong example
This instrument
(Current probe)
Warnings
Oscilloscope etc.
Power supply