Iwatsu SS-540 Instruction Manual page 8

4
Read this page to ensure proper safety. (to be continued)
• Do not handle this instrument if your hands are wet.
This may result in electric shock, fire or equipment damage.
• Do not touch the plug of the power cord if your hands
are wet.
This may result in electric shock.
• Be careful not to damage the insulating sheath of the
insulating target conductor to be measured.
• Make sure the oscilloscope connected to the BNC
output connector on the current probe is used with the
protective earth.
See "1.5.3 Recommended Power Supply and Oscilloscope" on
page 21 for our company instruments that fit this description.
• Do not use this instrument if the unit case is damaged.
This may result in electric shock. If the unit case is damaged,
contact Iwatsu office or our sales distributors for repair.
• Connect only the recommended power unit to this
instrument.
Use of power units not suited may result in fire or equipment
damage.
Oscilloscopes" on page 21.
• Confirm that any dust does not adhere to the power plug
before inserting surely it into the power supply
receptacle.
Dust may result in electric shock, fire, or malfunction.
• Do not place this instrument in an area there frequent
vibrations or impacts occur.
If this instrument is dropped or overturned, it may cause a
physical injury or a malfunction.
Warnings
See 1.5.3 "Recommended Power Supply and