Iwatsu SS-540 Instruction Manual page 7

Read this page to ensure proper safety. (to be continued)
• Do not use this instrument in an environment with
explosive gases.
This may result in explosion.
• If you notice smoke, foul odor or abnormal noise,
immediately turn off the power supply of all equipment
with which this instrument is connected, and then
detach this instrument from the insulating target
conductor to be measured.
Continued use under these circumstances may result in electric
shock or fire. Contact Iwatsu office or our sales distributors for
repair. Do not attempt to repair this instrument yourself.
• Turn off the power to the insulating target conductor to
be measured before attaching or detaching sensor head
part of this instrument to or from the insulating target
conductor to be measured.
Failure to do so is very dangerous for targets to be measured that
use high current.
• Do not use this instrument to measure exposed
conducting lines.
This may result in electric shock, short-circuiting or equipment
damage. (The clamp core and shield casing are not insulated.)
• Use caution not to wet this instrument or allow entry of
water or foreign objects into.
Continued use under these circumstances may result in an
electric shock, fire, or failure. If water, foreign objects, or other
substances enter this instrument or the instrument is wet with
water, immediately turn off the power supply of all equipment with
which this instrument is connected, and then detach this
instrument from the insulating target conductor to be measured.
After that, contact Iwatsu office or our sales distributors for repair.
Warnings
3