Isolating Moving Subjects - Casio EXILIM EX-S7 User Manual

NOTE
• To shoot with the self-portrait feature in combination with a continuous shutter (CS)
mode (page 70), use [4] and [6] to turn on face detection (page 43). Operation is
the same as that when a continuous shutter (CS) mode is used in combination with
Auto Shutter. See page 75 for more information.
IMPORTANT!
• If the camera remains in Auto Shutter standby without releasing the shutter, you
can record an image by pressing the shutter button all the way down again.
• Shooting with the self-portrait feature may produce a blurred image when shooting
in areas where lighting is dim, which results in a very slow shutter speed setting.
• The Auto Power Off (page 147) trigger time is fixed at five minutes while the
camera is in Auto Shutter standby. Sleep (page 146) is disabled while Auto Shutter
being used.
Isolating Moving Subjects (Multi-motion Image)
Multi-motion Image can be used to isolate a moving subject
within a series of multiple images and places them against
a stationary background. Make sure that the camera is not
moving or shaking when shooting with Multi-motion Image.
1.
Press [BS] and then select the "Multi-motion
Image" scene.
2.
Press the shutter button to start shooting.
Continuous Shutter shooting will stop after some time, and the resulting
composite image will appear on the monitor screen.
• Keep the camera still until all of the continuous shutter images are recorded.
• When using this feature, image size is fixed at 3M (2048
IMPORTANT!
• When shooting under bright conditions, the resulting image may appear brighter
than when shooting a normal snapshot.
63
1536 pixels).
x
Using BEST SHOT