Casio EXILIM EX-S7 User Manual page 173

LENS ERROR
Load paper!
Memory Full
No subjects in
memory. Use the
BS "Dynamic
Photo" to shoot a
subject.
Printing Error
Record Error
RETRY POWER ON
SYSTEM ERROR
The card is locked.
There are no files.
There are no
printing images.
Set up DPOF.
There is no image
to register.
This card is not
formatted.
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
The printer ran out of paper while printing.
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
29).
There is no extracted subject in camera memory that can be
inserted into a background image.
An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The LOCK switch of the SD or SDHC memory
card loaded in the camera is in the locked
position. You cannot store images to or delete
images from a memory card that is locked.
There are no files in built-in memory or on the memory card.
There are currently no files specified for printing. Configure
the required DPOF settings (page 119).
The setup you are trying to save is for an image that cannot
be saved as a user BEST SHOT scene.
The memory card loaded in the camera is not formatted.
Format the memory card (page 149).
173
LOCK
Appendix