1. Manuals
  2. Brands
  3. Casio Manuals
  4. Digital Camera
  5. EX-S7 - EXILIM Digital Camera
  6. User manual

Casio EXILIM EX-S7 User Manual

Casio digital camera user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
E

Digital Camera

User's Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User's Guide.
• Keep the User's Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
To go to "Getting the Most Out of Dynamic Photo" click here!
1

Advertisement

Table of Contents
loading

Related Manuals for Casio EXILIM EX-S7

Summary of Contents for Casio EXILIM EX-S7

  • Page 1: Digital Camera

    Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/...

  • Page 2: Unpacking

    As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Rechargeable lithium ion Digital camera Charger unit (BC-81L) battery (NP-80) To attach the strap to the camera Attach strap here.

  • Page 3: Read This First

    CASIO COMPUTER CO., LTD. is forbidden under copyright laws. • CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use or malfunction of this product.

  • Page 4: Table Of Contents

    What is a digital camera? ........14 What you can do with your CASIO camera ......15 First, charge the battery prior to use..
  • Page 5 Recording Movie Images and Audio To record a movie ..........50 Using Prerecord Movie .
  • Page 6 Controlling Color Saturation ......(Saturation) . . . 85 Adjusting Image Contrast ....... (Contrast) . . . 86 Specifying Flash Intensity .
  • Page 7 Printing Printing Snapshots..........116 Connecting Directly to a PictBridge Compatible Printer .
  • Page 8 How to Use the Histogram ........150 Appendix Precautions during Use .

  • Page 9: General Guide

    General Guide The numbers in parentheses indicate the pages where each item is explained. . Camera Front Zoom controller (pages 25, 47, 91, 92) Shutter button (page 25) [ON/OFF] (Power) (page 23) Flash (page 36) Front lamp (pages 24, 38) Lens Microphone (pages 51, 109)
  • Page 10 Charger Unit Contacts [CHARGE] Lamp AC jack...

  • Page 11: Monitor Screen Contents

    Monitor Screen Contents The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera.
  • Page 12 . Shutter Button Half-pressed NOTE • If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not correct, the setting will turn orange when you half-press the shutter button. easy Mode Recording mode (page 25) Flash (page 36) ISO sensitivity (page 41) Aperture value Shutter speed...

  • Page 13: Movie Recording

    . Movie Recording 1 2 3 . Snapshot Viewing blbk . Movie Playback Flash (page 36) Recording mode (page 50) White balance setting (page 83) Remaining movie memory capacity (page 50) Movie recording time (page 50) Exposure compensation (page 82) Battery level indicator (page 19) Histogram (page 150) Anti Shake (page 77)

  • Page 14: Quick Start Basics

    Quick Start Basics What is a digital camera? A digital camera stores images on a memory card, so you can record and delete images a countless number of times. Record Delete Play You can use the images you record in a variety of different ways.

  • Page 15: What You Can Do With Your Casio Camera

    What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following three main functions. Dynamic Photo Extract a moving subject out of a series of Continuous Shutter images you have shot and insert them into another image to create a Dynamic Photo image that features the moving subject.

  • Page 16: First, Charge The Battery Prior To Use

    Note that the battery of a newly purchased camera is not charged. Perform the steps under “To charge the battery” to bring the battery to a full charge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery.
  • Page 17 Other Charging Precautions • Use the special charger (BC-81L if included with camera, BC-80L if purchased separately) to charge the special lithium ion battery (NP-80). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident.

  • Page 18: To Load The Battery

    To load the battery Open the battery cover. Pressing the battery cover, slide it in the direction indicated by the arrow. Load the battery. With the EXILIM logo on the battery facing upwards (in the direction of the monitor screen), hold the stopper next to the battery in the direction indicated by the arrow as you slide the battery into the...
  • Page 19 Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power Battery Indicator Indicator Color indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when •...

  • Page 20: Configuring Basic Settings The First Time You Turn On The Camera

    Configuring Basic Settings the First Time You Turn On the Camera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images.

  • Page 21: Preparing A Memory Card

    NOTE • Each country controls its local time offset and the use of summer time, and so they are subject to change. • Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be reset to their factory defaults. Do not remove the battery for at least 24 hours after configuring settings.

  • Page 22: To Format (Initialize) A New Memory Card

    • Should water or any foreign object ever get into the card slot, immediately turn off the camera, remove the battery, and contact your retailer or nearest CASIO authorized service center. To format (initialize) a new memory card You need to format a new memory card before using it for the first time.

  • Page 23: Turning The Camera On And Off

    Turning the Camera On and Off To turn power on To enter the REC mode, press [ON/OFF] (Power) or [r] (REC). To enter the PLAY mode, press [p] (PLAY). The back lamp will light (green) momentarily and the camera will turn on. If you are entering the REC mode, the lens will extend from the camera at this time.

  • Page 24: Holding The Camera Correctly

    Holding the Camera Correctly Your images will not come out clearly if you move the camera when you press the shutter button. When pressing the shutter button, be sure to hold the camera as shown in the illustration below, and keep it still by pressing your arms firmly against your sides as you shoot.

  • Page 25: To Shoot A Snapshot

    To shoot a snapshot Press [r] (REC) to turn on the camera. Make sure R is on the display. If it isn’t, see page 55. Snapshot mode icon Remaining Snapshot Memory Capacity (page 175) Point the camera at the subject. You can zoom the image, if you want.
  • Page 26 Half-press the shutter button to focus the image. When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green. Half-press Press lightly until the button stops. Beep, beep (Image is in focus.) Continuing to keep the camera still, press the shutter button the rest of the way down.

  • Page 27: Using Quick Shutter

    . Using Quick Shutter Fully pressing the shutting button without waiting for Auto Focus to operate will record using Quick Shutter (page 78). • With Quick Shutter, the camera focuses faster than normal Auto Focus, which means you can capture quick moving action more easily. Note, however, that some images may be out of focus when Quick Shutter is used.

  • Page 28: Viewing Snapshots

    Viewing Snapshots Use the following procedure to view snapshots on the camera’s monitor screen. • For information about how to play back movies, see page 87. Press [p] (PLAY) to enter the PLAY mode. • This will display one of the snapshots currently stored in memory.

  • Page 29: Deleting Images

    Deleting Images If memory becomes full, you can delete images you no longer need to free up storage and record more images. IMPORTANT! • Remember that a file (image) delete operation cannot be undone. • Deleting an audio snapshot (page 109) deletes both the snapshot and the audio file.

  • Page 30: Snapshot Shooting Precautions

    Snapshot Shooting Precautions Operation • Never open the battery cover while the back lamp is flashing green. Doing so can result in the image you just shot being saved incorrectly, damage to other images stored in memory, malfunction of the camera, etc. •...

  • Page 31: Snapshot Tutorial

    Snapshot Tutorial Using the Control Panel The Control Panel can be used to configure camera settings. In the REC mode, press [SET]. This will select one of the Control Panel icons and display its settings. [8] [2] [4] [6] [SET] Use [8] and [2] to select the setting you want to change.

  • Page 32: Specifying Control Panel Items

    149). Changing the Image Size (Size) . Pixels A digital camera image is a collection of small dots called “pixels”. The more pixels there are in an image, the more detail there will be. However, you generally can do with fewer...
  • Page 33 . About image sizes The size of an image indicates how many pixels it contains, and is expressed as horizontal pixels vertical pixels. 8M (3264 2448) size image = Approximately 8 million pixels VGA (640 480) size image = Approximately 300,000 pixels Image Size Selection Tips Note that larger images have more pixels, so they take up more memory space.

  • Page 34: To Select The Snapshot Image Size

    . To select the snapshot image size In the REC mode, press [SET]. Use [8] and [2] to select the top Control Panel option (Snapshot Image Size). Use [ ] and [6] to select an image size and then press [SET]. Suggested Image Size Print Size and...
  • Page 35 . Specifying Movie Image Quality Movie image quality is a standard that determines the detail, smoothness, and clarity of a movie during playback. Shooting with the high-quality (HD) setting will result in better image quality, but it also shortens the amount of time you can shoot. In the REC mode, press [SET].

  • Page 36: Using Flash

    Using Flash (Flash) In the REC mode, press [2] ( once. Use [4] and [6] to select the flash setting you want and then press [SET]. • You can select the flash mode by pressing [2] ( ) in either of the following cases.
  • Page 37 NOTE • Take care so your fingers and the strap do not block the flash. • The desired effect may not be obtained when the subject is too far away or too close. • Flash charging time (page 178) depends on operating conditions (battery condition, ambient temperature, etc.).

  • Page 38: Using The Self-Timer

    Using the Self-timer (Self-timer) With the Self-timer, pressing the shutter button starts a timer. The shutter is released and the image is shot after a fixed amount of time. In the REC mode, press [SET]. Use [8] and [2] to select the fourth Control Panel option from the top (Self-timer).

  • Page 39: Specifying The Auto Focus Area

    NOTE • The Self-timer cannot be used together with the following features. Normal Speed CS, High Speed CS, some BEST SHOT scenes (Prerecord (Movie), Voice Recording) • The Triple Self-timer cannot be used together with the following features. Auto Shutter, Movie, Make-up Mode, Landscape Mode, some BEST SHOT scenes (Dynamic Photo, Multi-motion Image, ID Photo, Business cards and documents, White board, etc., For YouTube) Specifying the Auto Focus Area (AF Area)
  • Page 40 Press the shutter button the rest of the way down. “Ò Intelligent” Focus frame IMPORTANT! • “È Multi” cannot be selected for the Auto Focus area while you are using Face Detection (page 43). • “Ë Tracking” cannot be selected for the Auto Focus area while you are using Auto Shutter (page 73).

  • Page 41: Specifying Iso Sensitivity

    Specifying ISO Sensitivity (ISO) ISO sensitivity is a measure of sensitivity to light. In the REC mode, press [SET]. Use [8] and [2] to select the sixth Control Panel option from the top (ISO Sensitivity). Use [4] and [6] to select the setting you want and then press [SET]. AUTO Adjusts sensitivity automatically according to conditions ISO 64...
  • Page 42 Use [4] and [6] to select “ | ON” and then press [SET]. This enters the easy mode. Focus the image. While the focus frame is aligned with the subject, half-press the shutter button. Shoot the image. When the image is focused, press the shutter button the rest of the way. This records the snapshot.

  • Page 43: Using Face Detection

    Use [8] and [2] to select the setting you want, and then press [SET]. Menu Item: Available Settings: Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off) Self-timer • (10-second self-timer) / l* Image Size 1* / % / ! easy Mode k / l* Exit Menu...
  • Page 44 Press [SET] and then use [8] and [2] to select the second Control Panel option from the bottom (Face Detection). Use [4] and [6] to select “G Face Detection: On” and then press [SET]. Point the camera at the subject(s). The camera will detect human faces and display a frame around each one.

  • Page 45: Shooting With The Make-Up Mode

    Shooting with the Make-up Mode (Make-up) The Make-up Mode smoothes the skin texture of the subject and softens facial shadows caused by harsh sunlight for better looking portraits. In the REC mode, use [4] and [6] to display in the control panel, which enters the ±...

  • Page 46: Shooting Beautiful Scenery Images

    Shooting Beautiful Scenery Images (Landscape) The Landscape Mode makes colors more vivid, filters haze, and performs other processing that enhances the beauty of natural scenery. In the REC mode, use [4] and [6] to display in the control panel, which enters the Ö...

  • Page 47: Changing The Control Panel Date/Time Style

    Changing the Control Panel Date/Time Style In the REC mode, press [SET]. Use [8] and [2] to select the bottom Control Panel option (Date/Time). Use [4] and [6] to select the date or time. NOTE • You can select either of two display style (page 145) for the date: Month/Day or Day/Month.

  • Page 48: Optical Zoom And Digital Zoom Switch Point

    NOTE • The higher the digital zoom factor, the coarser the recorded image. Note that the camera also has a function that lets you record using digital zoom without image deterioration (page 49). • Use of a tripod is recommended to protect against image blur due to camera movement when shooting with telephoto.
  • Page 49 • The image deterioration point depends on the image size (page 32). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point. • Though digital zoom generally causes a deterioration of image quality, some digital zoom without image deterioration is possible with image sizes of “8M”...

  • Page 50: Recording Movie Images And Audio

    Recording Movie Images and Audio To record a movie Configure the quality setting for the movie (page 35). The length of the movie you can record will depend on the quality setting you select. In the REC mode, press [0] (Movie).
  • Page 51 NOTE • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. • The camera also records audio. Note the following points when shooting a movie. –...

  • Page 52: Using Prerecord Movie

    Using Prerecord Movie With this feature, the camera prerecords up to four seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it.

  • Page 53: Shooting A Snapshot While Shooting A Movie

    Shooting a Snapshot while Shooting a Movie While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded. NOTE • You can use [2] ( ) while shooting a movie to change the flash mode setting. •...

  • Page 54: To Play Back An Audio Recording

    NOTE • You can use [8] (DISP) during audio recording to toggle the monitor screen on and off. • When monitor screen contents are turned off, selecting the “Voice Recording” scene will cause the monitor screen to turn off immediately (page 150). About audio data •...

  • Page 55: Using Best Shot

    Using BEST SHOT What is BEST SHOT? BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically.
  • Page 56 Press [SET] to configure the camera with the settings for the currently selected scene. This returns to the REC mode. • The settings of the scene you selected remain in effect until you select a different scene. • To select a different BEST SHOT scene, repeat the above procedure from step 1.
  • Page 57 . BEST SHOT Precautions • The following BEST SHOT scenes cannot be used while recording a movie. Dynamic Photo, Multi-motion Image, ID Photo, Business cards and documents, White board, etc., Self-portrait (1 person), Self-portrait (2 people) • The following BEST SHOT scene cannot be used while shooting a snapshot. Prerecord (Movie), For YouTube •...

  • Page 58: Creating Your Own Best Shot Setups

    Creating Your Own BEST SHOT Setups You can save up to 999 camera setups as user BEST SHOT scenes for instant recall whenever you need them. On the BEST SHOT scene menu, select the scene named BEST SHOT (Register User Scene). Use [4] and [6] to select the snapshot or movie whose setup you want to save.

  • Page 59: Shooting With Auto Best Shot

    Shooting with AUTO BEST SHOT With AUTO BEST SHOT, the camera automatically selects the BEST SHOT scene that suits your subject and shooting conditions, and configures its settings accordingly. The following are the scenes selected automatically by AUTO BEST SHOT. Portrait, Scenery, Night Scene, Night Scene Portrait, Macro, Sports, etc.

  • Page 60: Shooting Id Photographs

    Shooting ID Photographs You can use this procedure to shoot a portrait and then print it out in the following standard ID photo sizes: 30 45 mm. Press [BS] and then select the “ID Photo” scene. Press the shutter button to shoot a portrait of the person for whom you want to create an ID photo.

  • Page 61: Shooting Images Of Business Cards And Documents

    Shooting Images of Business Cards and Documents A process called “keystone correction” makes lines straight and natural, even if rectangular subjects are shot from an angle. BEST SHOT has two scenes. Press [BS] and then select the “Business cards and documents” or “White board, etc.”...

  • Page 62: Recording A Self-Portrait

    NOTE • When composing an image like the ones shown above, make sure that the entire outline of the object you are trying to shoot is enclosed within the monitor screen. • Make sure the object is against a background that allows its outline to stand out. •...

  • Page 63: Isolating Moving Subjects

    NOTE • To shoot with the self-portrait feature in combination with a continuous shutter (CS) mode (page 70), use [4] and [6] to turn on face detection (page 43). Operation is the same as that when a continuous shutter (CS) mode is used in combination with Auto Shutter.

  • Page 64: Advanced Settings

    Advanced Settings The following are menu operations you can use to configure various camera settings. • You also can use the Control Panel (page 31) to configure some of the settings that appear on the menu screen. Refer to the page references provided in this section for information about configuring settings using the Control Panel.
  • Page 65 Use [8] and [2] to select the menu item you want, and then press [6]. Use [8] and [2] to change the setting. After the setting is the way you want, press [SET]. • Pressing [ ] registers the selected setting and returns to the menu.

  • Page 66: Rec Mode Settings

    REC Mode Settings (REC) Selecting a Focus Mode (Focus) Procedure [r] (REC) * [MENU] * REC Tab * Focus Settings Type of Shot Q Auto General recording Focus ´ Macro Close ups Shooting with a E Pan relatively wide Focus focus range Scenery and other ) Infinity...
  • Page 67 Zoom Steps Z1 (Wide) Approx. 0.8 (2.6') 7 (Tele) Approx. 3.5 (11.5') NOTE • Above values are for reference only. For movie macro, the focus range is a few centimeters within the center distance. To focus with manual focus On the monitor screen, compose the image so the subject you want to focus on is within the yellow boundary.
  • Page 68 NOTE • An Auto Macro feature detects how far the subject is from the lens and automatically selects either Macro Focus or Auto Focus accordingly. • Use of the flash together with Macro Focus can cause the light of the flash to become blocked, which may result in unwanted lens shadows in your image.

  • Page 69: Changing The Focus Frame Shape

    Changing the Focus Frame Shape (Focus Frame) Procedure [r] (REC) * [MENU] * REC Tab * Focus Frame You can use this procedure to select from among five different shapes, including a heart shape, for the focus frame. Settings NOTE •...

  • Page 70: Specifying The Auto Focus Area

    Specifying the Auto Focus Area (AF Area) Procedure [r] (REC) * [MENU] * REC Tab * AF Area For details, see the Control Panel procedure on page 39. Using Continuous Shutter (CS) Procedure [r] (REC) * [MENU] * REC Tab * CS Your camera has two continuous shutter modes.

  • Page 71: Specifying The Method For Saving Continuous Shutter Images

    . Specifying the Method for Saving Continuous Shutter Images Specify the method to use for saving images recorded with “High Speed CS”. After continuous shutter shooting is finished, use [8] and [2] to select the save method you want and then press [SET]. Save Selected The shot images are played back at slow speed so you can select the images you want to save.

  • Page 72: Using The Self-Timer

    IMPORTANT! • If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen. Make sure your memory card has sufficient remaining capacity before shooting with using continuous shutter.

  • Page 73: Using Auto Shutter

    Using Auto Shutter (Auto Shutter) Procedure [r] (REC) * [MENU] * REC Tab * Auto Shutter With Auto Shutter, the camera releases the shutter automatically when it detects that certain conditions are present. Camera releases the shutter automatically when it detects Detect Blur image blur to camera and subject movement are ¸...
  • Page 74 . To use Detect Panning to minimize image blur (Detect Panning) Point the camera at location where the subject will pass and then half- press the shutter button to adjust exposure and focus. Press the shutter button the rest of the way down.
  • Page 75 . To change Auto Shutter trigger sensitivity (Sensitivity) Use [8] and [2] to select “Sensitivity” and then press [6]. Use [4] and [6] to select the sensitivity setting you want, and then press [SET]. • You can select any one of three sensitivity levels, from ø (Lowest) to œ...

  • Page 76: Shooting With Face Detection

    IMPORTANT! • If the camera remains in Auto Shutter standby without releasing the shutter, you can record an image by pressing the shutter button all the way down again. • Detect Blur and Detect Panning may not produce the desired effect when shooting in an area where dim lighting requires a slow shutter speed, or when the subject is moving extremely quickly.

  • Page 77: Reducing The Effects Of Subject Movement

    Reducing the Effects of Subject Movement (Anti Shake) Procedure [r] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement when shooting a moving subject using telephoto, when shooting a fast- moving subject, or when shooting under dim lighting conditions.

  • Page 78: Shooting With Quick Shutter

    Shooting with Quick Shutter (Quick Shutter) Procedure [r] (REC) * [MENU] * REC Tab * Quick Shutter When Quick Shutter is turned on, you can press the shutter button all the way without waiting for Auto Focus. This will record the image using a high-speed focus operation that is much faster than Auto Focus.

  • Page 79: Turning Digital Zoom On Or Off

    Turning Digital Zoom On or Off (Digital Zoom) Procedure [r] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. When digital zoom is turned off, operating the zoom controller zooms the image with optical zoom only. Turning on Image Review (Review) Procedure [r] (REC) * [MENU] * REC Tab * Review...

  • Page 80: Configuring Power On Default Settings

    Configuring Power On Default Settings (Memory) Procedure [r] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera.

  • Page 81: Image Quality Settings

    Image Quality Settings (Quality) Specifying Snapshot Size (Size) Procedure [r] (REC) * [MENU] * Quality Tab * Size For details, see the Control Panel procedure on page 34. Specifying Snapshot Image Quality (Quality (Snapshot)) Procedure [r] (REC) * [MENU] * Quality Tab * T Quality Fine Gives image quality priority.

  • Page 82: Correcting Image Brightness

    Correcting Image Brightness (EV Shift) Procedure [r] (REC) * [MENU] * Quality Tab * EV Shift You can manually adjust an image’s exposure value (EV value) before shooting it. • Exposure Compensation Range: –2.0 EV to +2.0 EV • Unit: 1/3 EV Use [8] and [2] to adjust the exposure compensation value.

  • Page 83: Controlling White Balance

    Controlling White Balance (White Balance) Procedure [r] (REC) * [MENU] * Quality Tab * White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.

  • Page 84: Specifying Iso Sensitivity

    Specifying ISO Sensitivity (ISO) Procedure [r] (REC) * [MENU] * Quality Tab * ISO For details, see the Control Panel procedure on page 41. Specifying the Metering Mode (Metering) Procedure [r] (REC) * [MENU] * Quality Tab * Metering The metering mode determines what part of the subject is metered for exposure. Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading.

  • Page 85: Optimizing Image Brightness

    Optimizing Image Brightness (Lighting) Procedure [r] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas when shooting images. Performs a higher level of brightness correction than the “On” setting. Extra When this option is selected, it takes longer for the image to be stored after the shutter button is pressed.

  • Page 86: Adjusting Image Contrast

    Adjusting Image Contrast (Contrast) Procedure [r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark). Specifying Flash Intensity (Flash Intensity) Procedure [r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify one of five flash intensity settings, from –2 (weakest) to +2...

  • Page 87: Viewing Snapshots And Movies

    Viewing Snapshots and Movies Viewing Snapshots See page 28 for the procedure for viewing snapshots. Viewing a Movie Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. Press [SET] to start playback. Movie Playback Controls [4] [6] Fast forward/...

  • Page 88: Viewing Continuous Shutter Images

    Viewing Continuous Shutter Images Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group. Press [ ] (PLAY) and then use [ whose images you want to view.

  • Page 89: Deleting Continuous Shutter Images

    NOTE • Multiple images shot using “Normal Speed CS” are stored individually and are not grouped. This means they can be displayed individually (page 28) but not as a CS group. Deleting Continuous Shutter Images You can use the following procedures to delete images while playback is in progress or paused.

  • Page 90: Dividing Up A Cs Group

    Dividing Up a CS Group Use the following to divide up a CS Group into individual images. . Dividing Up a Specific CS Group While a CS group is displayed, press [MENU]. Use [ ] and [ ] to select the “PLAY” tab. Use [ ] and [ ] to select “Divide Group”...

  • Page 91: Zooming An On-Screen Image

    Zooming an On-screen Image In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. Slide the zoom controller towards z ( zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen.

  • Page 92: Displaying The Image Menu

    Displaying the Image Menu In the PLAY mode, slide the zoom controller towards w (]). Use [8], [2], [4] and [6] to move the selection boundary around the image menu. To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET].

  • Page 93: Viewing Snapshots And Movies On A Tv Screen

    Viewing Snapshots and Movies on a TV Screen Use the AV cable that comes with the camera to connect it to the TV. Yellow Video Audio AUDIO IN jacks (white) VIDEO IN jack (yellow) Making sure that the 2 mark on the camera is aligned with the 8 mark of the AV cable connector, connect the cable to the camera.
  • Page 94 Now you can display images and play back movies as you normally do. IMPORTANT! • Before connecting to a TV to display images, be sure to configure the camera’s [r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 147). •...

  • Page 95: Other Playback Functions (Play)

    Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 64. Playing a Slideshow on the Camera (Slideshow) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Slideshow Start Starts the slideshow.

  • Page 96: Saving Music From Your Computer To Camera Memory

    Effect Select the effect you want. Pattern 1 to 5: Plays background music and applies an image change effect. • Patterns 1 through 4 have different background music, but they all use the same image change effect. • Pattern 5 can be used for playback of snapshots only, and the “Interval” setting is ignored.
  • Page 97 Connect the camera to your computer (pages 124, 133). If you plan to save the music files to the camera’s memory card, make sure the card is loaded in the camera. Perform one of the following operations to open the memory card or built-in memory.

  • Page 98: Laying Out Snapshots With Layout Print

    Laying Out Snapshots with Layout Print (Layout Print) Procedure [p] (PLAY) * Spnapshot Screen * [MENU] * PLAY Tab * Layout Print You can use the following procedure to insert existing snapshots into the frames of a layout and produce a new image that contains multiple snapshots.

  • Page 99: Creating A Snapshot Of Movie Frames

    Creating a Snapshot of Movie Frames (MOTION PRINT) Procedure [p] (PLAY) * Movie Screen to be Used * [MENU] * PLAY Tab * MOTION PRINT Use [4] and [6] to scroll through the movie frames and display the one you want to use as the image of the MOTION PRINT image.

  • Page 100: Editing A Movie On The Camera

    Editing a Movie on the Camera (Movie Editing) Procedure [p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] * PLAY Tab * Movie Editing The Movie Editing feature lets you use one of the following procedures to edit out a specific part of a movie.
  • Page 101 When the frame where you want the cut point to be is displayed, press [2]. (To-Point Cut) (Point-To-Point Cut) ¡ (From-Point Cut) Use [8] and [2] to select “Yes” and then press [SET]. The selected cut operation will take considerable time to complete. Don’t try to perform any camera operation until the “Busy...

  • Page 102: Optimizing Image Brightness

    Optimizing Image Brightness (Lighting) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas in existing images. Performs a higher level of brightness correction than the “+1” setting. Performs brightness correction.

  • Page 103: Adjusting White Balance

    Adjusting White Balance (White Balance) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * White Balance You can use the white balance setting to select a light source type for a recorded image, which will affect the colors of the image. Daylight Outdoors, fair weather ¤...

  • Page 104: Adjusting The Brightness Of An Existing Snapshot

    Adjusting the Brightness of an Existing Snapshot (Brightness) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Brightness You can select one of five brightness levels, from +2 (brightest) to –2 (least bright). NOTE • The original snapshot is retained in memory and not deleted. •...

  • Page 105: Using Color Correction To Correct The Color

    Using Color Correction to Correct the Color of an Old Photograph (Color Correction) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Color Correction Color Correction lets you correct the color of an old photograph. The corrected image is saved as 2M (1600 1200 pixels) size.

  • Page 106: Selecting Images For Printing

    Selecting Images for Printing (DPOF Printing) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing See page 119 for details. Protecting a File Against Deletion (Protect) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Protect Protects specific files.

  • Page 107: Editing The Date And Time Of An Image

    Editing the Date and Time of an Image (Date/Time) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Date/Time [8] [2] Changes the setting at the cursor location. [4] [6] Moves the cursor between settings. [BS] Toggles between 12-hour and 24-hour format. When the date and time settings are what you want, press [SET] to apply them.

  • Page 108: Resizing A Snapshot

    Resizing a Snapshot (Resize) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Resize You can reduce the size of a snapshot and save the result as a separate snapshot. The original snapshot is also retained. You can select resize an image to one of three image sizes: 8M, 5M, VGA.

  • Page 109: Adding Audio To A Snapshot

    Adding Audio to a Snapshot (Dubbing) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Dubbing You can add audio to a snapshot after you shoot it. You can re-record a snapshot’s audio whenever you want. You can record up to about 30 seconds of audio for a single snapshot.

  • Page 110: Copying Files

    Voice Recording Playback Controls Fast forward/fast reverse Play/pause Volume adjustment Display content switching Stop playback • Audio of an Audio Snapshot also can be played back on a computer with Windows Media Player or QuickTime. Copying Files (Copy) Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * Copy Files can be copied from the camera’s built-in memory to a memory card or from a memory card to built-in memory.

  • Page 111: Dynamic Photo

    Dynamic Photo You can use the procedures in this section to crop either a moving subject or a still subject out of a snapshot and then insert it into another snapshot. Moving Subject To create a subject image to be inserted (Dynamic Photo) Press [BS] and then select the “Dynamic Photo”...
  • Page 112 Use [8] and [2] to select either “1” or “2” and then press [SET]. To shoot under these conditions: The subject against a complex background The subject against a plain (no pattern) background First, shoot an image that includes the subject you want to extract.

  • Page 113: Inserting A Subject Into A Background Image

    Press the shutter button to shoot the background only. The camera compares the images you shot in steps 6 and 8 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected “Moving Subject”, the subject image will be moving on the display. •...

  • Page 114: To View A Dynamic Photo

    Use [4] and [6] to select the subject image you want to insert and then press [SET]. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position. When everything is the way you want, press [SET]. This inserts the subject into the background image and creates a Dynamic Photo.

  • Page 115: Converting A Dynamic Photo To A Movie

    Converting a Dynamic Photo to a Movie (Movie Converter) A Dynamic Photo (a background image plus subject) is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.

  • Page 116: Printing

    Printing Printing Snapshots Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer Printing Images on a Printer with Memory Card Slot You can use a printer equipped with a memory card slot to print images directly from a memory card.

  • Page 117: Connecting Directly To A Pictbridge Compatible Printer

    Connecting Directly to a PictBridge Compatible Printer You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer. . To set up the camera before connecting to a printer Turn on the camera and press [MENU]. On the “Set Up”...
  • Page 118 . To print Turn on the printer and load paper. Turn on the camera. This will display the print menu screen. Use [8] and [2] to select “Paper Size”, and then press [6]. Use [8] and [2] to select a paper size and then press [SET].

  • Page 119: Using Dpof To Specify Images To Be Printed And The Number Of Copies

    Using DPOF to Specify Images to be Printed and the Number of Copies . Digital Print Order Format (DPOF) DPOF is a standard that allows you to include image type, number of copy, and time stamp on/off information on the memory card with the images. After configuring settings, you can use the memory card to print on a home printer that supports DPOF or take the memory card to a professional print service.
  • Page 120 . Configuring the Same DPOF Settings for All the Images Procedure [p] (PLAY) * Snapshot Screen * [MENU] * PLAY Tab * DPOF Printing * All images Use [8] and [2] to specify the number of copies. You can specify a value up to 99. Specify 00 if you do not want to print the image. •...

  • Page 121: Date Stamping

    . Date Stamping You can use one of the following three methods to include the recording date in the printout of an image. Configuring camera settings Configure DPOF settings (page 119). You can turn date stamping on and off each time you print. You can configure settings so some images include the date stamp and some don’t.

  • Page 122: Using The Camera With A Computer

    Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there Transfer images stored on your computer to camera memory Play back and edit...

  • Page 123: Using The Camera With A Windows Computer

    Edit movies Upload movie files to YouTube Transfer images to the camera View the User’s Guide YouTube Uploader for CASIO and Photo Transport will not run under 64-bit versions of Windows OS. Operating System Install this software: Version 7 / Vista / XP / Installation not required.

  • Page 124: Viewing And Storing Images On A Computer

    . Computer System Requirements for Bundled Software Computer system requirements are different for each of the applications. See the “Read me” file that comes with each application for details. Information about computer system requirements also can be found under “Computer System Requirements for Bundled Software (Bundled CD-ROM)”...

  • Page 125: Your Computer

    Turn off the camera and then use the USB cable that comes with the camera to connect it to your computer. • The camera does not draw power over the USB cable. Make sure the camera’s battery is sufficiently charged before connecting.
  • Page 126 Right-click the “DCIM” folder. On the shortcut menu that appears, click “Copy”. Windows 7/Vista users: Click “Start” and then “Documents”. Windows XP users: Click “Start” and then “My Documents”. Windows 2000 users: Doubleclick “My Documents” to open it. • If you already have a “DCIM” folder in “Documents” (Windows 7/Vista) or “My Documents”...

  • Page 127: Playing Movies

    Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 140. • An image that was rotated on the camera will be displayed on your computer screen in its original (unrotated) orientation. Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card.

  • Page 128: Uploading Movie Files To Youtube

    Uploading Movie Files to YouTube Installing YouTube Uploader for CASIO from the CD-ROM that comes with your camera simplifies uploading of movie files you recorded with the “For YouTube” BEST SHOT scene to YouTube.
  • Page 129 . To upload a movie file to YouTube • Before you can use YouTube Uploader for CASIO, you need to go to the YouTube website (http://www.youtube.com/) and register as a user there. • Do not upload any video that is copyrighted (including neighboring copyrights) unless you yourself own the copyright or you have obtained the permission of the applicable copyright holder(s).

  • Page 130: Transferring Images From Your Computer To Camera Memory

    . To transfer images to the camera Connect the camera to your computer (page 124). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Drag the file(s) you want to transfer to the [Transfer] button.
  • Page 131 . To transfer computer screen captures to the camera Connect the camera to your computer (page 124). On your computer, click the following: Start * All Programs * CASIO * Photo Transport. This starts up Photo Transport. Display the screen whose screen capture you want to transfer.

  • Page 132: Viewing User Documentation

    On the menu screen, click the “Language” down arrow button and then select the language you want. Click “Manual” to select it and then click “Digital Camera”. IMPORTANT! • You must have Adobe Reader or Adobe Acrobat Reader installed on your computer in order to view the contents of a PDF file.

  • Page 133: Using The Camera With A Macintosh

    Using the Camera with a Macintosh Install the required software in accordance with what version of the Macintosh OS you are running and what you want to do. Operating When you want to System do this: Version Save images to your OS 9 Macintosh and view OS X...

  • Page 134: Your Macintosh

    Turn off the camera and then use the USB cable that comes with the camera to connect it to your Macintosh. • The camera does not draw power over the USB cable. Make sure the camera’s battery is sufficiently charged before connecting.

  • Page 135: To View Copied Images

    After the copy operation is complete, drag the drive icon to Trash. On the camera, press [ON/OFF] (Power) to turn off the camera. After making sure that the green back lamp is unlit, disconnect the camera from the computer. . To view copied images Double-click the camera’s drive icon.

  • Page 136: Transferring Images Automatically And Managing Them On Your Macintosh

    Transferring Images Automatically and Managing Them on Your Macintosh If you are running Mac OS X, you can manage snapshots using iPhoto, which comes bundled with some Macintosh products. If you are running Mac OS 9, you will need to use commercially available software.

  • Page 137: Viewing User Documentation

    Open the file named “camera_xx.pdf”. • “xx” is the language code (Example: camera_e.pdf is for English.). User Registration Internet registration only is supported. Visit the following CASIO website to register: http://world.casio.com/qv/register/ Using an Eye-Fi Wireless SD Memory Card to Transfer Images...
  • Page 138 IMPORTANT! • Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or turn off Eye-Fi card communication (page 142) when on an aircraft or in any other location where use of wireless communication is limited or prohibited. •...

  • Page 139: Files And Folders

    Files and Folders The camera creates a file and saves it each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. •...

  • Page 140: Memory Card Data

    Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF DCF is a standard that makes it possible to view and print images recorded on one manufacturer’s camera on DCF-compliant devices produced by other manufacturers. You can transfer DCF-compliant images recorded with another camera to this camera and view them on this camera’s monitor screen.

  • Page 141: Supported Image Files

    . Supported Image Files • Image files shot with this camera • DCF-compliant image files This camera may not be able to display an image, even if it is DCF-compliant. When displaying an image recorded on another camera, it may take a long time for the image to appear on this camera’s monitor screen.

  • Page 142: Other Settings (Set Up)

    Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 64. Turning off Eye-Fi Card Communication (Eye-Fi) Procedure [MENU] * Set Up Tab * Eye-Fi Select “Off”...

  • Page 143: Specifying The File Name Serial Number Generation Rule

    Specifying the File Name Serial Number Generation Rule (File No.) Procedure [MENU] * Set Up Tab * File No. Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 139). Tells the camera to remember the last used file number.

  • Page 144: Configuring World Time Settings

    Use [8], [2], [4], and [6] to select the geographic area you want and then press [SET]. Use [8] and [2] to select the city you want and then press [SET]. Press [SET]. IMPORTANT! • Before configuring World Time settings, make sure that the Home City setting is the place where you live or normally use the camera.

  • Page 145: Setting The Camera's Clock

    Setting the Camera’s Clock (Adjust) Procedure [MENU] * Set Up Tab * Adjust [8] [2] Change the setting at the cursor location [4] [6] Move the cursor between settings [BS] Toggles between 12-hour and 24-hour format When the date and time settings are what you want, press [SET] to apply them. •...

  • Page 146: Specifying The Display Language

    Specifying the Display Language (Language) Procedure [MENU] * Set Up Tab * Language . Specify the display language you want. Select the tab on the right. Select “Language”. Select the language you want. Configuring Sleep State Settings (Sleep) Procedure [MENU] * Set Up Tab * Sleep This feature turns off the monitor screen whenever no camera operation is performed for a preset amount of time.

  • Page 147: Configuring Auto Power Settings

    Configuring Auto Power Settings (Auto Power Off) Procedure [MENU] * Set Up Tab * Auto Power Off Auto Power Off turns off the camera whenever no camera operation is performed for a preset amount of time. Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY mode.) •...

  • Page 148: Configuring Usb Protocol Settings

    Configuring USB Protocol Settings (USB) Procedure [MENU] * Set Up Tab * USB You can use the procedure below to select the USB communication protocol, which is used when exchanging data with a computer, printer, or other external device. Select this setting when connecting to a computer (pages 124, 133). Mass With this setting, the computer sees the camera as an external Storage...

  • Page 149: Formatting Built-In Memory Or A Memory Card

    Formatting Built-in Memory or a Memory Card (Format) Procedure [MENU] * Set Up Tab * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. •...

  • Page 150: Configuring Monitor Screen Settings

    Configuring Monitor Screen Settings You can turn display information on and off by pressing [8] (DISP). You can configure separate settings for the REC mode and PLAY mode. Information display on Information display + Histogram on Information display off Using the On-screen Histogram to Check Exposure Displays a histogram on the monitor screen which you can use to check the exposure of an image before you shoot it.
  • Page 151 Example Histograms A histogram towards the left side results when the overall image is dark. A histogram that is too far to the left may result in “black out” of the dark areas of an image. A histogram towards the right side results when the overall image is light.

  • Page 152: Appendix

    Appendix Precautions during Use . Avoid Use While In Motion • Never use the camera to record or play back images while operating an automobile or other vehicle, or while walking. Looking at the monitor while in motion creates the risk of serious accident. .
  • Page 153 • Never try to take the camera apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, maintenance, and repair up to your dealer or nearest CASIO authorized service center.
  • Page 154 • The battery is intended for use with a CASIO Digital Camera only. Use with any other device creates the risk of the battery damage, or deterioration of battery performance and service life.

  • Page 155: Battery Life

    • If battery charging does not end normally within the specified charging time, stop charging anyway and contact your local CASIO authorized service center. Continued charging creates the risk of battery overheating, fire, and explosion.

  • Page 156: Data Error Precautions

    . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory. – Removing the battery or memory card while the camera is performing some operation –...

  • Page 157: Caring For Your Camera

    Doing so creates the risk of fire, malfunction, and electric shock. 0 Should the power cord ever become damaged (to the point that internal wires are exposed or cut), immediately contact your original retailer or a CASIO authorized service center to request repair. Continued use of a damaged power cord creates the risk of fire, malfunction, and electric shock.
  • Page 158 Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of this product in any way that infringes on the copyrights of others or that violates copyright laws.

  • Page 159: Power Supply

    • Check if the charger and battery contacts are dirty. If contacts are dirty, wipe them clean with a dry cloth. If problems continue to occur after you perform the above steps, it could mean that the battery is faulty. Contact your nearest CASIO authorized service center. Appendix...

  • Page 160: To Replace The Battery

    To replace the battery Open the battery cover and remove the current battery. With the monitor screen side of the camera facing upwards, slide the stopper in the direction indicated by the arrow in the illustration. After the battery pops out, pull it the rest of the way out of the camera.

  • Page 161: Using The Camera In Another Country

    Using the Camera in another Country . Precautions during Use • The bundled charger is designed for operation with any power supply in the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the power cord plug depends on each country or geographic area.
  • Page 162 • If a memory card starts to behave abnormally during image playback, you can restore normal operation by reformatting it (page 149). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office. •...

  • Page 163: Computer System Requirements For Bundled Software

    Hard Disk Drive Space : At least 180MB Other : Internet Explorer 6.0 or higher installed For details about the minimum system requirements for each software application, see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes bundled with the camera. Appendix...

  • Page 164: Reset Initial Default Settings

    Reset Initial Default Settings The tables in this section show the initial default settings that are configured for menu items (displayed when you press [MENU]) after you reset the camera (page 149). Menu items depend on whether the camera is in the REC mode or PLAY mode. •...
  • Page 165 “Quality” Tab Size 12M (4000 Quality Normal (Snapshots) Quality » (Movies) EV Shift White Balance Auto Auto “Set Up” Tab Eye-Fi Startup: Sound 1 / Half Shutter: Sound 1 / Shutter: Sound 1 / Sounds Operation: Sound 1 / = Operation: ...//// / = Play: ...//// Startup...

  • Page 166: Play Mode

    . PLAY Mode “PLAY” Tab Images: All images / Time: 30 min / Slideshow Interval: 3 sec / Effect: Pattern 1 Dynamic Photo – Movie – Converter Layout Print – MOTION PRINT 9 frames Movie Editing – Lighting – Red Eye –...

  • Page 167: When Things Don't Go Right

    2)The battery may be dead. Charge the battery (page 16). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-80 rechargeable lithium ion battery. The camera 1)Auto Power Off may have activated (page 147).
  • Page 168 (page 36) or select a different BEST SHOT scene (page 55). The ? (Flash Off) The flash unit may be malfunctioning. Contact a CASIO icon flashes red on authorized service center or your original retailer. Note that...
  • Page 169 Problem Possible Cause and Recommended Action A recorded image 1)Camera power may have been turned off before the save was not saved. operation was complete, which will result in the image not being saved. If the battery indicator shows battery as soon as possible (page 19). 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved.
  • Page 170 Images are not This camera cannot display non-DCF images recorded onto a displayed. memory card using another digital camera. Images cannot be 1)Note that you cannot edit the following types of snapshots. edited (with Layout • Snapshots created using MOTION PRINT Print, resizing, •...
  • Page 171 If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. The time and date Load the camera’s battery and reconfigure the time and date settings configured settings (page 20).

  • Page 172: Display Messages

    Display Messages The camera’s protection function may have activated because camera temperature is too high. Turn off the ALERT camera and wait until it cools down before trying to use it again. Battery is low. Battery power is low. Keystone correction of the image cannot be performed for Cannot correct some reason.
  • Page 173 If the same LENS ERROR message appears after you turn power back on, contact a CASIO authorized service center or your original retailer. Load paper! The printer ran out of paper while printing. Memory is full with images you recorded and/or files saved Memory Full by editing operations.
  • Page 174 This file cannot be The file you are trying to access is corrupted or is a type that played. cannot be displayed by this camera. You attempted to copy images from built-in memory to a This function memory card while there is no memory card loaded in the cannot be used.

  • Page 175: Number Of Snapshots/Movie Recording Time/Voice Recording Time

    Number of Snapshots/Movie Recording Time/ Voice Recording Time Snapshot Image Size Image (Pixels) Quality Fine (4000 3000) Normal Economy Fine (4000 2656) Normal Economy 16:9 Fine (4000 2240) Normal Economy Fine (3264 2448) Normal Economy Fine (2560 1920) Normal Economy Fine (2048 1536)

  • Page 176: Voice Recording

    Movies Image Maximum Quality File Size (Pixels) 1280 Maximum Movie Size: 4 GB Maximum YouTube Movie Length: 10 minutes Voice Recording Maximum File Format File Size 4 GB IMA-ADPCM Built-in memory capacity after formatting The above values are based on use of a PRO HIGH SPEED SD memory card (Panasonic Corporation).

  • Page 177: Specifications

    Specifications File Format Snapshots: Movies: Audio (Voice Recording): WAV (monaural) Recording Media Built-in Memory (Image Storage Area: 35.2MB*) SD/SDHC * Built-in memory capacity after formatting. Recorded Image Sizes Snapshot: Movies: Image Deletion 1 file; all files (with memory protection feature) Effective Pixels 12.1 Megapixels Imaging Element...
  • Page 178 Aperture Value F3.1 (W) to F7.8 (W) (When used with ND filter) * Using optical zoom changes the aperture value. White Balance Auto, Daylight, Overcast, Shade, Day White Fluorescent, Daylight Fluorescent, Tungsten, Manual WB Sensitivity (Standard Snapshots: Output Sensitivity, Recommended Movies: Auto Exposure Index) Self-timer...
  • Page 179 Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life. Number of Shots (CIPA) (Operating Time)* Continuous Playback (Snapshots)* Approximate continuous movie recording time Continuous Voice Recording*...
  • Page 180 . Rechargeable lithium ion battery (NP-80) Rated Voltage Rated Capacitance Operating Temperature Requirements Dimensions Weight . Charger unit (BC-81L) Input Power Output Power Operating Temperature Requirements Supported Battery Type Charging Time Dimensions Weight • Power cord precautions for use in Singapore The power cord set is not supplied.
  • Page 181 CASIO COMPUTER CO.,LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA1002-B...
  • Page 182 Dynamic Getting the Most Out of Dynamic Photo For a wealth of information about Dynamic Photo including explanations about how to use Dynamic Photo images, the Dynamic Studio image conversion service, sample images, and more, visit the special Dynamic Photo website at: This manual provides an introduction to Dynamic Photo, which creates a whole new way to enjoy digital imaging.

  • Page 183: Dynamic Photo! A Totally New Way To Enjoy Digital Photography

    Dynamic Photo! A totally new way to enjoy digital Dynamic Photo makes it easy to crop a moving subject out of a series of images and insert it into other images! A simple operation on the camera extracts a moving subject automatically by cropping up to 20 Continuous Shutter images.

  • Page 184: Using The Dynamic Photo Extracted Sample Subjects

    Using the Dynamic Photo Extracted Sample Subjects Your digital camera comes with a number of extracted sample subjects in its built-in memory. You can use these sample subjects to practice creating Dynamic Photo images by inserting them into your original snapshots.
  • Page 185 After creation of the Dynamic Photo image is complete, the finished image with the inserted moving subject will appear on the monitor screen. After you master the above procedure using extracted sample subjects, you will be ready to create your own extracted subjects and insert them into snapshots for totally original Dynamic Photo images.

  • Page 186: Creating A Dynamic Photo Image

    Creating a Dynamic Photo Image Step 1: Shoot the subject. Dynamic Photo images are created by extracting the subject out of one image, and inserting it into another image. The term “subject” as used here refers to what you extract or crop out of the first image. Perform the following steps to shoot and extract the subject.
  • Page 187 First, shoot the subject. Best results can be obtained with the camera secured on a tripod. With the camera pointed at the moving subject, press the shutter button to record. If you selected “Moving Subject”, the camera will record a series of Continuous Shutter (CS) images over a few seconds.

  • Page 188: Step 2: Create The Dynamic Photo Image

    Complete! The camera compares the images you shot in steps 3 and 4 and extracts the subject. The extracted subject image will appear on the monitor screen. If you selected “Moving Subject”, the 20 subject images that were recorded will scroll on the screen, creating the illusion of movement.
  • Page 189 Use [4] and [6] to select the subject you want to insert and then press [SET]. * Only subjects that can be inserted into other images will appear at this time. Use the zoom controller to adjust the size of the subject and use [8], [2], [4], and [6] to adjust its position.

  • Page 190: Four Tips For Good Subject Cropping

    Four Tips for Good Subject Cropping • When shooting the subject image, shoot against a white wall or some other surface whose color is different from that of the subject. The camera will not be able to crop the subject image properly if its color is the same as or similar to the background color.

  • Page 191: Specifying The Subject Type And Cs Speed

    Move the subject away from the wall to avoid shadows! The camera may mistake shadows on the wall or floor caused by strong sunlight, illumination, or other light sources as part of the subject. Shadows tend to form when the subject is too close to a wall.

  • Page 192: Changing The "Number Of Shots" Setting

    CS speed Moving Subject 20 frames per 1sec (20fps) second Moving Subject 10 frames per 2sec (10fps) second Moving Subject 5 frames per 4sec (5fps) second Still Subject Changing the “Number of Shots” Setting Normally you need to shoot the subject you want to extract against a background and then shoot the background again without the subject.

  • Page 193: Step 3: Have Fun With Dynamic Photo

    Step 3: Have fun with Dynamic Photo. You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways. Step 4: Convert a Dynamic Photo to a Movie A Dynamic Photo is stored as a series of 20 still images. You can use the following procedure to convert the 20 images that make up a Dynamic Photo to a movie.

  • Page 194: Step 5: Use Dynamic Studio To Expand Use Of Dynamic Photo Images To Other Applications

    This makes it possible to view Dynamic Photo images you created with a CASIO EXILIM digital camera to a format that can be played back as a movie on a PC, digital photo frame, cell phone or other device.

This manual is also suitable for:

Exilim ma1002-b 1104

Table of Contents