Operating Noises; Cleaning And Maintenance; Troubleshooting - Proline PLCH103-1 Instruction Manual

OPERATING NOISES

Normal noises
• Motors are running.
• Refrigerant is flowing through the tubing.

CLEANING AND MAINTENANCE

Do not use abrasive cleaning agents or solvents.
1. Set the thermostat control knob to the Min position and unplug
the appliance from the mains socket.
2. Take out the food and store in a cool location.
3. Wait until the layer of frost has thawed.
4. Clean the appliance and baskets with a soft cloth, using warm
water and detergent.
5. Wipe the door seal with clear water only and then wipe dry
thoroughly.
6. After cleaning, reconnect and adjust the temperatures as desired.
7. Put the food back into the appliance.

TROUBLESHOOTING

If there is a problem with your appliance, please check the following
points before contacting customer service.
Problem
Appliance does not
operate.
Appliance is noisy.
Appliance not cool Temperature setting
Condensation on
the outer surface
and door seals of
the freezer.
Possible causes
No electricity at power
outlet.
Cabinet not stable.
not correct.
Frequent door openings.
Large amount of food
recently added.
Ambient humidity is
high.
EN-13
Possible solution
Check that the plug is
correctly connected and
power switched on.
See "Installation" section.
See "Temperature
Control" section.
Minimise door openings
to allow the temperature
to stabilise.
It is normal. Please
wipe dry.