Installation; Ambient Temperature; Before Placing Food In The Appliance; Temperature Control - Proline PLCH103-1 Instruction Manual

INSTALLATION

Install the appliance in a dry, well ventilated room. The installation
location should neither be exposed to direct sunlight nor near a heat
source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum
of 10 cm of airspace on each side of the cabinet.

AMBIENT TEMPERATURE

This appliance is designed to operate in ambient temperature
between 10°C and 43°C. If these temperatures are exceeded, i.e.
colder or warmer, the appliance will not operate correctly. If the
ambient temperatures are exceeded for long periods, the
temperature in the freezer will rise above -18°C and food spoilage
may occur.

BEFORE PLACING FOOD IN THE APPLIANCE

• Remove all packaging.
• Allow the appliance to run empty for 1 hour so the freezer can cool
to the appropriate temperature.
• Clean the inside of the appliance with warm water and a little
liquid detergent to remove manufacturing and transportation dust.

TEMPERATURE CONTROL

1. Plug the freezer in the mains socket.
• The green power indicator light will illuminate.
2. Adjust the thermostat control knob to the desired
position between Min (cold) and Max (coldest).
NOTES:
The running time and temperature are affected by where the
appliance is located, how often the door is opened and the
temperature of the room the appliance is located in.
EN-8