Descaling Mode - Whirlpool CS2320 Manual

Operation Instructions

■ Descaling Mode

Water used in steaming mode may result in scale accumulated inside cavity and water pipe.
"Descaling" icon will be on once combi steamer has reached 100hrs steam related cooking time to remind the user to run
the descaling programme mode. The light will stay on until the descaling is performed.
Descaling is carried out in three stages that involve one descaling process and two descaling and cleaning processes. The
user has to change the liquid in the tank 3 times during the entire cleaning process. It is also necessary to empty the drip tray
by cleaning up. Icon will be lighted to remind cleaning up the drip tray is needed.
Also, descaler is required for this mode. Customer can select the Wpro descaler under Whirlpool brand. This product can be
used in steamer for cleaning limescale deposits effectively, optimizing machine performance and prolonging the lifespan of the
appliance. For more details, please visit our website: www.whirlpool.com.hk
For satisfactory results, follow the suggested dosage for descaler and water below:
Stage 1: Descaling. Running time is 30 minutes. Suggested dosage: 50ml descaling agent and 500ml pure water.
Stage 2: 1st descaling and cleaning process. Running time is 10 minutes. Suggested dosage: 550ml pure water.
Stage 3: 2nd descaling and cleaning process. Running time is 10 minutes. Suggested dosage: 550ml pure water.
Temperature
Default Setting Cannot be adjusted
Setting Range Cannot be adjusted
Steps:
1. Stage 1: Descaling
A. Fill the water tank up to the level of the descaling 550ml icon
B. In standby mode, turn the knob clockwise to
(as shown in the diagram below).
C. The descaling mode will start (as shown in the diagram below).
D. Stage 1 takes 30 minutes. When done, the time display digits wi
stage 1 is complete. Drip tray cleaning reminder icon will light up on the display panel to remind the user to
empty the drip tray.
E. Pour out the dirty liquid and put the drip tray back into place.
2. Stage 2: 1st descaling and cleaning process
A.
B. Put the water tank back into place and close the oven door. Descaling and cleaning will begin automatically.
C.
Drip tray cleaning reminder icon will light up on the display panel to remind the user to empty the drip tray.
D. Pour out the dirty liquid and put the drip tray back into place.
S48893-Whirlpool Combi Steamer User Manual_EN_V12.indd 78-79
Time
50 mins
Cannot be adjusted
with 50ml descaling agent and 500ml pure water.
550ml icon with 550ml pure water.
will sound to indicate stage 2 is complete.
78
Operation Instructions
3. Stage 3: 2nd descaling and cleaning process
A. Open the oven door. Fill the water tank up to the level of the descaling 550ml icon
B. Put the water tank back into place and close the oven door. Descaling and cleaning will begin automatically.
C. When done, the display will show "END" and an audio tone will sound.
up on the display panel to remind the user to empty the drip tray.
D. Pour out the dirty liquid and put the drip tray back into place.
4. Descaling is complete.
Important:
1. The function of "Combination Button: Cavity temperature display" is not available in this mode.
2. The function of "Adjust or Increase the Cooking Time during/after Cooking is Completed" is not available in this mode.
3. Descaling mode will be interrupted if the steps of descaling mode is taken in the wrong way (including pause during the
descaling process or open and close the oven door not following instructions etc). Please restart descaling mode and
follow the instructions in the manual.
79
with 550ml pure water.
Drip tray cleaning reminder icon will light
26/7/2016 下午12:55